Programs closing with no warning WIN 10

Hello, how are you?
Welcome to the Microsoft Community!

My name is Paloma B., I'm an independent advisor, I'm here to help you in the best possible way.

Analyzing the information presented, I recommend that you follow the guidelines below, please, to try to solve this problem.

First, I recommend downloading and running the tool on the link below, please, for a system check and update:
https://go.microsoft.com/fwlink/?LinkID=799445

Verify that the problem is resolved.

If it persists, based on your equipment model, go to the manufacturer's website and download compatible and updated drivers, and reinstall them. Follow the guidelines on the link below, please.
https://support.microsoft.com/en-us/help/402844...

Verify that the problem is resolved.

If the problem persists, please follow the next guidelines.
Important: at the end of each method, check if the problem has been solved. If it persists, proceed to the next one.

SFC, DISM and CHKDSK.

Use a Windows disk, file and image correction tool

1. On the desktop, press the Windows + X keys, and select Windows Powershell (Admin);

2. Copy and paste the following commands, one line at a time, followed by Enter:

sfc /scannow

dism /online /cleanup-image /CheckHealth

dism /online /cleanup-image /restorehealth

chkdsk /f /r /b

To schedule a disk check, confirm with the S key and press Enter, and restart the equipment.

*** IMPORTANT ***

This is a process that can take some time to complete.

Verify that the problem is resolved.

If the problem persists, please follow the next guidelines.
Important: at the end of each method, check if the problem has been solved. If it persists, proceed to the next one.

Clean Boot

For clean boot follow the steps below:

1. On the Desktop, simultaneously press the Windows + R keys to open Run;
2. In Run, type MSCONFIG and click OK to open the System Configuration;
3. On the Services tab, check the option Hide all Microsoft services and click Disable All;
4. Click Apply and OK;
5. Restart the computer.

NOTE: This procedure disables all third party services and programs. You can later, if the problem is solved in this way, selectively enable the programs and services that will start with Windows, instead of keeping all disabled. If the problem returns after activating the startup of a specific service or program, the problem is exactly in the startup of this software and it is recommended to remove it.

I await news.

If these procedures helped you in any way, please click on "I solved my problem" and also mark as an answer, so you can help others users.

We will always be available for whatever you need!

I have the same problem, windows closing without any warning after today's windows update.

I followed all steps until:

"For clean boot follow the steps below:"

I can not continue because MSCONFIG closes without any warning too.

I have same problem, last night the following updates were installed (KB4601319 & KB4601050) and now, when opening any program, after a few seconds it closes without alert. spotify, cutter, vscode, vmware tested... chrome and discord works fine.

The installation of the updates did not generate a restore point, fortunately directx was installed two days ago and it did. The control panel tool for restoring to a previous point also closes after a moment. I had to restore from boot by restarting the computer holding "shift" key. This solved my problem. i cancel automatic updates for a while.

I can also confirm that I'm having the same issue when KB4601319 has been installed.

After the update programs will no longer stay open. After some seconds they will disappear without warning nor give out an error message.

MS Problem Reports shows that the programs "Stopped working".

The only way to get Windows 10 working normally again is by uninstalling KB4601319 and hiding the update.

This is very annoying!

My setup:

Edition Windows 10 Pro

Version 20H2

Installed on ‎31-‎May-‎20

OS build 19042.746

Experience Windows Feature Experience Pack 120.2212.551.0

I seem to have solved what is causing the issue. I changed to my 5gb ethernet and that is what caused the problem. I found other people having tha same issue somthat is what made see if it was my problem. I switched to the second Intel adapter and the problem appears to have gone away.

That IMO is only a workaround...... if indeed your system is now stable.

Mine has been running perfectly since May 2020 but not with KB4601319 

I haven't a clue where to look for as a starting point. It's difficult to debug as most programs and windows disappear after a few seconds.

I also tried this method:

1. On the Desktop, simultaneously press the Windows + R keys to open Run;
2. In Run, type MSCONFIG and click OK to open the System Configuration;
3. On the Services tab, check the option Hide all Microsoft services and click Disable All;
4. Click Apply and OK;
5. Restart the computer.

It did not solve the problem.

Same exact issue.

Apps work in safe mode but not otherwise.

Reported this to msft earlier this week when it first occurred. Got an update again today and here we are again.

Seems like KB4601319 has issues and needs to be pulled and fixed.

Do you by any chance have Asus GPU Tweak 2 installed? Try closing that program and then try opening what you want again. This worked for me.

Do you by any chance have Asus GPU Tweak 2 installed? Try closing that program and then try opening what you want again.