Blue Screen 0x00000124 and HAL.dll error

Hi,

BCCode: 124 is a Hardware Failure though software such as BIOS, low level chipset drivers, drivers,
and even security programs can cause it.

Check this thread for information on using BlueScreenView, MyEventViewer, and other methods
to troubleshoot BlueScreens - top 3 replies.

http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

----------------------------------------------------------

Since its a new build hardware, BIOS, low level chipset drivers are among the things you should
check. Reduce the system to the simpliest possible configuration to see if that helps the issue.

This is usually heat related, defective hardware, memory or even processor though it is "possible"
that it is driver related (rare). Remove ALL power and reseat all cards, memory and cables (on
both ends) - actually remove and replace - do not just snug. Make sure the system has adequate
ventilation - add a small fan blowing into intakes. Carefully inspect the motherboard and other
cards for damage. Pay attention to the fatal hardware error implication. You may need a real
computer shop (not leeks and peeks at a BestBuy or other BigBox stores) or the System maker's
Support.

There have been a few instances where Norton/Symantec and other antivirus/security programs
have caused this error.
 
BCCode: 124   0x00000124

The WHEA_UNCORRECTABLE_ERROR bug check has a value of 0x00000124. This bug check indicates
that a fatal hardware error has occurred. This bug check uses the error data that is provided by the
Windows Hardware Error Architecture (WHEA).

0x00000124 <-- read this link
http://www.faultwire.com/solutions-fatal_error/The-system-encountered-an-uncorrectable-hardware-error-0x00000124-*1289.html

======================================================================
======================================================================

References to Vista also apply to Windows 7.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView - Free - utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
description, version, product name, company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker's which are the most current.
Control Panel - Device Manager - Display Adapter - write down the make and complete model
of your video adapter - double click - Driver's tab - write down the version info. Now click UPdate
Driver (this may not do anything as MS is far behind certifying drivers) - then Right Click -
Uninstall - REBOOT this will refresh the driver stack.

Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party
with their own software and drivers and any other major device drivers you have.

Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and then Device
Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for
BIOS, Chipset and software updates at System Maker's site while there.)

Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN - REBOOT after
each installation.

Always check in Device Manager - Drivers tab to be sure the version you are installing actually
shows up. This is because some drivers rollback before the latest is installed (sound drivers
particularly do this) so install a driver - reboot - check to be sure it is installed and repeat as
needed.

Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER - check
manually by model.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in Windows 7 (updating drivers manually using the methods above is
preferred to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update drivers manually then it is a good idea to disable Driver Installations in Windows
Updates, this leaves Windows Updates ON however it will not install drivers which will usually
be older and cause issues. If Updates suggests a new driver then HIDE it (Right Click on it)
and then go look for new ones manually if you wish.

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

==========================================

Memory tests do not catch all errors such as mismatched memory (possible even for sticks
that appear to be identical) and when faster memory is placed in system behind slower memory.
So it is best to also swap sticks in and out to check for those even if all memory tests fail to show
a problem.

To test RAM check here - let it run 4+ hours or so.
www.memtest.org

For the Windows Memory Diagnostic Tool.

Start - type in Search box ->  Memory - find Memory Diagnostics tool at top of list - Right Click -
RUN AS ADMIN follow the instructions

Windows Vista: How to Scan / Test your RAM or Memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/windows-vista-how-to-scan-test-your-ram-or-memory-with-windows-vista-memory-diagnostic-tool/

How to Run the Memory Diagnostics Tool in Windows 7
http://www.sevenforums.com/tutorials/715-memory-diagnostics-tool.html

Test Your Computer’s Memory Using Windows Vista Memory Diagnostic Tool
http://www.howtogeek.com/howto/windows-vista/test-your-computers-memory-using-windows-vista-memory-diagnostic-tool/

Hope this helps.