Bridging Guide

Zyxel P-663HN-51 Series

Login Information

Gateway - 192.168.1.1

Username - admin

Password - 1234

Bridging Guide 

*Bridge mode should only be used if you have a router to plug into the device.*

*Please have PPPoE information available if needed to enter into the router (contact ISP if needed to get this information)*

1. Connect your computer directly to the Zyxel with an ethernet cable.
2. Open a web browser.
3. Put http://192.168.1.1 into the address bar at the top.  When prompted for login information enter the username "admin" and the password "1234".
4. Once logged in click on "Advanced Setup" in the left-hand column.
5. Select WAN from the submenu.
6. Click the Edit button on the right hand side of that page.
7. Click next until you get to the Connection Type page.  On this page select Bridging.
8. Click next leaving all other settings on the defaults until you are given the option to save. Click Save.
9. Wait for the device to restart then powecycle both the Zyxel and the router.