Method 1: If you are in a domain environment then you have to contact your IT Department.
Method 2: You may also go through the suggestion provided and check: PXE-E53: No boot filename received.
The client received at least one valid DHCP/BOOTP offer, but does not have a boot filename to download. There are several possible causes:
•
The DHCP Server and the PXE Server were located on the same server, but one of them was moved to a different server. This would
result in an incorrect PXE Server configuration.
To resolve this issue, reinstall the PXE Server component of the Altiris Deployment Solution.
•
The DHCP relay agent, either a Proxy DHCP Server or a switch configured with helper addresses, is not configured correctly. For
example, if DHCP and PXE are on separate servers, the DHCP relay agent needs to have both addresses in its configuration.
To resolve this issue, correct the DHCP relay agent configuration.
•
If the Microsoft DHCP service is installed on the PXE server, but is disabled or unconfigured, Altiris PXE Setup configures PXE
to work with the local DHCP service (even if the DHCP service is disabled). This causes the PXE server to not respond to PXE clients that get a DHCP address from DHCP services running elsewhere on the network.
To resolve this issue, remove Microsoft DHCP services from the PXE server and reinstall the PXE Server component of the Altiris Deployment Solution.
