My xbox 360 slim wont show video using VGA cord . HELP Please!

you need  to move the  resolution on the monitor  ,  The 360 doesn't fully support 1920x1080. So you need to set it  back to 720p

Hi,

have you tried adjusting the display settings on the console? If you're not able to connect the console to a different monitor or tv and are therefor unable to adjust them, you can always reset the display settings of the console to factory defaults via these steps:

Reset the console display settings

If the display problem is still not resolved, reset the display settings of your console. Here's how:

1.Remove any discs from the disc tray.

2.Turn off the console.

3.Turn on the console.

Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left light illuminated.

4.As the console starts, on the controller, press and hold Y while pulling the right trigger. The display settings are reset to the default settings, and then the console automatically restarts.

I think you should see this support.microsoft.com/.../en-us , hope it helps.

when i tried all of these , the monitor  would do say entering power saving then the monitors screen stays blank .

Hi,

Have you checked which input is selected on the monitor, if it is set on hdmi or something else different from the one you are using you will have no image.

[quote user="RKOrocks619"]hello i really need help my xbox 360 wont show video on my dell monitor[/quote]Which Dell monitor are you trying to use? Which input? Are you attempting to use a VGA to DVI adapter of any sort?[quote user="NGr TaCTiiCs x"]you need  to move the  resolution on the monitor  ,  The 360 doesn't fully support 1920x1080. So you need to set it  back to 720p [/quote]This is incorrect. The 360 supports VGA resolutions up to 1920x1080, including several 16:10 options.

turn xbox on, unplug all video/audio cables out of xbox and keep the other end still inside tv. turn off xbox and plug them back in, plug controller in and turn on xbox, then wait 4 seconds and press right on dpad 9 times, press a 4 times and left anolog stick up 3 times. Your display should be fine now :)