Restore Factory Defaults

Login Information

  • Gateway - 192.168.10.1
  • Username – admin
  • Password – (blank)

 

Restoring Defaults

Through firmware

  1. Plug the computer into the LAN port of the device.
  2. Open web browser.
  3. Login to router by entering http://192.168.10.1 into the address bar.
  4. If prompted for a username and password use “admin” and leave the password blank.
  5. Select Tools on the left.
  6. Select Backup from the sub-menu on the left.
  7. Click the Reset button.
  8. Click Ok.
  9. Wait for lights on the device to turn off then return to normal.

 

Through Hardware

  1. Plug the computer into the LAN port of the device.
  2. Locate the reset button on the back of the device.
  3. Hold the reset button for at least 10 seconds.
  4. Wait for lights to turn off then return to normal.
 

Discussion Info


Last updated July 4, 2018 Views 7 Applies to: