Port Forwarding

Login Information

  • Gateway: 192.168.254.254
  • Username: admin
  • Password: admin

Port Forwarding

  1. Connect a computer to the gateway with an Ethernet cable.
  2. Open a web browser on a computer.
  3. Type the address 192.168.254.254 into the web address bar.
  4. This will take you to a login page, type admin for the “Password”.
  5. Once logged in select the NAT Settings on the left side.
  6. In the sub category click on Port Mapping.
  7. On the main page click on Add Item.
  8. In the Type drop down select Custom.
  9. For Protocol select TCP/UDP.
  10. For Remote Port Range type in the corresponding port number.
  11. For Local Port type in the same port number.
  12. For Status change to enable.
  13. Repeat steps 7-12 until all ports have been added.
  14. Select Submit to finish.

 

Disable Port Forwarding

  1. Connect a computer to the gateway with an Ethernet cable.
  2. Open a web browser on a computer.
  3. Type the address 192.168.254.254 into the web address bar.
  4. This will take you to a login page, type admin for the “Password”.
  5. Once logged in select the NAT Settings on the left side.
  6. In the sub category click on Port Mapping.
  7. Change the Enable option to Disable for each port.
 

Discussion Info


Last updated September 16, 2018 Views 271 Applies to:

i am using Etislat plz help me out how can i open ports