Restore Factory Defaults

Login Information

  • Gateway - 192.168.0.1
  • Username – N/A
  • Password – Last 6 digits of the device’s MAC Address and can be found on the back of the device.

 

Restore Factory Defaults

Through firmware

  1. Plug the computer into the LAN port of the device.
  2. Open web browser.
  3. Login to router by entering http://192.168.0.1 into the address bar.
  4. If prompted for a password use the last 6 digits of the device’s MAC Address located on the back of the device.
  5. Select Tools on the top.
  6. Select System from the sub-menu.
  7. Click the Restore All Settings to the Factory Defaults button.
  8. Click ok.
  9. Wait for lights on the device to turn off then return to normal.

Through Hardware

  1. Plug the computer into the LAN port of the device.
  2. Locate the reset button which is located within a small hole under the battery cover.
  3. Hold the reset button for at least 10 seconds.
  4. Wait for lights to turn off then return to normal.
 

Discussion Info


Last updated July 4, 2018 Views 5 Applies to: