Restore Factory Defaults

Login Information


Restore Factory Defaults

Through firmware

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser and in the address bar enter 192.168.1.1 and enter admin for both the username and password when prompted.
  3. Select Administration from the menu on the left.
  4. Select Restore/Save/Upload Setting from the tabs at the top.
  5. Click the Restore button next to Factory Default.

Through Hardware

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Locate the reset button on the device.
  3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
 

Discussion Info


Last updated July 4, 2018 Views 6 Applies to: