Bridging Guide

Zoom X5 5654


Login Information

Gateway – 10.0.0.2

Username – admin

Password – zoomadsl


 

Bridging Guide

 

  1. Plug the computer into the LAN port of the router.
  2. Open web browser.
  3. Login to router by entering http://10.0.0.2 into the address bar.
  4. If prompted for a username and password use admin/zoomadsl.
  5. The Basic Setup page appears.  Make the following changes:
  6. VPI: 0  (or set to your provider's specific setting)
  7. VCI: 35  (or set to your provider's specific setting)
  8. Encapsulation: 1483 Bridge IP LLC
  9. Bridge: Enabled
  10. Click Save Changes, Write Settings to Flash and Reboot, and then Confirm.
  11. After the modem is rebooted, click the Advanced Setup icon.
  12. Click LAN Settings. The LAN Configuration page appears.
  13. Change the DHCP Server to Disabled.
  14. Click Save Changes, Write Settings to Flash and Reboot, and then Confirm.
 

Discussion Info


Last updated July 4, 2018 Views 5 Applies to: