Restore Factory Defaults

Zoom X6 5690


Login Information

Gateway – 10.0.0.2

Username – admin

Password – zoomadsl


 

Restore Factory Defaults

Through firmware

  1. Plug the computer into the LAN port of the router.
  2. Open web browser.
  3. Login to router by entering http://10.0.0.2 into the address bar.
  4. If prompted for a username and password use admin/zoomadsl.
  5. Select Advanced Setup on the top.
  6. Select Reboot from the sub-menu under Administration.
  7. From the Reboot Mode drop down select “Reboot From Defaults Configuration”.
  8. Click Reboot.
  9. Wait for lights to turn off then return to normal.

 

Through Hardware

  1. Plug the computer into the LAN port of the router.
  2. Locate the Reset button on the device.
  3. Hold the Power button lights start to flash.
  4. Wait for lights to turn off then return to normal.

Was this discussion helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this discussion?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this discussion?

Thanks for your feedback.

 

Discussion Info


Last updated August 18, 2021 Views 3 Applies to: