Bridging Guide

Device Name Zhone 6210

Login Information:

Default Gateway –

Username – Admin

Password – Admin


Bridging Guide

  1. Open a web browser and type .
  2. Enter Admin for both the Username and Password.
  3. Click the Login button found in the lower right corner of the screen.
  4. Select Setup from the menu at the top.
  5. Select New Connection from the menu on the left.
  6. From the Type drop down menu select Bridge.
  7. Set VPI to 0 and VCI 35.
  8. Click the Apply button at the bottom of the screen.
  9. Select Tools from the menu across the top.
  10. Select System Commands from the menu at the left.
  11. Click the Save All button to make the changes permanent.

Discussion Info

Last updated July 4, 2018 Views 5 Applies to: