Bridging Guide

Westell 7550


Login Information

Gateway - 192.168.1.254

Username - N/A

Password - Device Access Code printed on the device


 

ATT/WESTELL Firmware (Blue/White)

 

Bridging Guide

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.254
  4. Click advanced tab.
  5. Click ppp location sub tab.
  6. Select the radio button "ppp is on the computer, gateway or router."
  7. Enter access code provided on sticker of gateway.
  8. Save and restart through prompts.

 

Verizon Firmware (Red/Black)

 

Bridging Guide

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.1
  4. The router will then prompt you to enter the username and password. The default user name and password are: "admin" and "password"/"admin"/"password1".
  5. Select Wireless Settings from the menu at the top.
  6. Select Basic Security Settings from the menu on the left.
  7. Select Off next to Wireless in the first section.
  8. Click the Apply button at the bottom.
  9. Select My Network from the menu at the top.
  10. Select Broadband Connection from the menu on the left.
  11. Click the Edit button (has a yellow pencil on it) next to the Enabled PPPoE connection listed in VCs.
  12. From the Protocol drop down select Bridge.
 

Discussion Info


Last updated July 4, 2018 Views 10 Applies to: