Bridging Guide

TP-Link TD-W8960N


Login Information

Gateway - 192.168.1.1

Username - admin

Password - admin


Bridging Guide

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Log into the device by entering the default gateway into the address bar of the internet browser (192.168.1.1).
  4. The device will then prompt you to enter the username and password.  The default username and password are "admin" and "admin".
  5. Select Layer2 Interface from the menu on the left.
  6. Select ATM Interface from the submenu.
  7. Leave the VPI and VCI on their default values.
  8. Select EoA from DSL Link Type options.
  9. Select LLC/SNAP-BRIDGING.
  10. The rest of the options should be left to the default values.
  11. Click the Apply/Save button.
 

Discussion Info


Last updated July 4, 2018 Views 23 Applies to: