Wireless Security

Siemens Gigaset SE567

 

Standard Version


Login Information

Gateway - 192.168.254.254

Username - admin

Password – admin


 

How To Find Wireless Passphrase (WPA/WEP)

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “admin” or “wirelessdsl” for the password.
  3. Select Gateway from the menu at the top.
  4. Select home network from the menu on the left.
  5. Select begin Wireless Wizard.
  6. Select Next on the first two pages.
  7. The WEP key will be listed where it say 64 Bit key or on the next page where it says 128 Bit Key.

 

Changing Wireless Security Type/ Disabling Wireless Security

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “admin” or “wirelessdsl” for the password.
  3. Select Gateway from the menu at the top.
  4. Select home network from the menu on the left.
  5. Select begin wireless wizard.
  6. Select Next.
  7. To disable wireless security select Disable Security from the Security Mode drop down.
  8. If an alternate method of security is desired choose from: WEP 64 Bits, WPA-PSK TKIP, WPA-PSK AES.
  9. Select Next.
  10. Set or verify the wireless passphrase on this screen.
  11. Click Finish.

 


Telus Version


Login Information

Gateway - 192.168.1.254

Username - admin

Password – telus


 

How to Find Wireless Passphrase (WPA/WEP)

 

  1. Open a web browser.
  2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “telus” for the password.
  3. Select Advanced Settings from the menu at the top.
  4. Select Wireless Network from the menu on the left.
  5. Select Encryption & Authentication from the sub-menu.
  6. There is a drop-down box on this page that says how to passphrase is configured: WPA, WEP64 or WEP128. Based on what security configuration the gateway is set up, click on that section on the left.
  7. The passphrase will be located on this page.

 

Changing Wireless Security Type/ Disabling Wireless Security

 

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
  4. Select Advanced Settings from the menu at the top.
  5. Select Wireless Network from the menu on the left.
  6. Select Encryption & Authentication from the sub-menu.
  7. Select None/Disabled/Open from the Security Mode drop down to disable wireless security.
  8. Alternate modes of Wireless Security can be selected from this drop down. Select WPA/WPA2 or WEP.
  9. Click the Apply button once you have selected your security type.
 

Discussion Info


Last updated July 4, 2018 Views 3 Applies to: