Overview

Siemens Speedstream 5x00 Series

 

Login Information

  • Gateway - 192.168.254.254
  • Username - admin
  • Password – (created during initial setup)

How to Find SSID (Network Name)

 

Not Available.

  

How To Find Wireless Passphrase (WPA/WEP)

 

Not Available.

 

Changing Wireless Security Type/ Disabling Wireless Security

 

Not Available.

 

MAC Filtering

 

Not Available.

 

Change Wireless Channel

 

Not Available.

 

Change Wireless Mode

 

Not Available.

 

DHCP Reservation

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter admin for the user name and your created password.
  3. Under the section titled Setup select DHCP from the menu on the left.
  4. Under the section labeled "IP Reserved Addresses" enter the IP Address and MAC Address of the Xbox.
  5. Select Apply.

 

UPnP

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
  3. Select UPnP from the left menu.
  4. Toggle UPnP.

 

DMZ

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter admin for the user name and your created password.
  3. Under the section titled setup, select firewall from the menu on the left.
  4. Select DMZ.
  5. Select the second “enable DMZ with this host IP address:”
  6. Select the IP address of the xbox from the drop down.
  7. Select Apply.

 

Disable DMZ

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter admin for the user name and your created password.
  3. Under the section titled setup, select firewall from the menu on the left.
  4. Select DMZ.
  5. Select Disable DMZ.
  6. Select Apply.

 

Port Forwarding

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
  3. Under the section titled setup, select port forwarding from the menu on the left.
  4. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
  5. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
  6. Select Apply.

 

Disable Port Forwarding

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
  3. Under the section titled setup, select port forwarding from the menu on the left.

 

Firewall

 

  1. Open a web browser.
  2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
  3. Under the section titled setup, select firewall from the menu on the left and then filter ruled from the submenu.
  4. Uncheck enabled attack detection system.
  5. Select Apply.

 

How to Find Firmware Version

 

Not Available.

 

Updating Firmware

 

Firmware updates are installed automatically by the Internet Service Provider

 

Restore Defaults

 

*Please have PPPoE information available, if you do not have this, please contact your ISP.*

 

Through firmware

 

This option is not available.

 

 Through Hardware

 

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Locate the reset button on the back of the device.
  3. Using a paperclip press and hold the reset button for 30 seconds.
  4. Wait for the device to restart.

 

Bridging Guide

 

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
  4. 192.168.254.254/brgmode.htm
  5. Click the Apply button.
  6. Click the Reboot button.

 

Multiple Console Support

 

We have confirmed that this network device is unable to support more than one console with an Open NAT. 

 

Known Issues

 

No known issues

Device Manual

Click here for the manual.

 

 

 

Discussion Info


Last updated July 4, 2018 Views 6 Applies to: