Restore Factory Defaults

Login Information

  • Gateway - 192.168.1.254
  • Username - admin
  • Password – (Device access code from sticker)

Restoring Factory Defaults

*Make sure to have PPPoE information available if required by ISP*

Through Firmware

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Open a web browser.
  3. Enter http://192.168.1.254 in the address bar. (Or click the link) Enter the username and password if the gateway asks (admin/password on sticker).
  4. Select Factory Reset.
  5. Select OK.

Through Hardware

  1. Plug the computer into a LAN port via an ethernet cable.
  2. Locate the reset button on the device.
  3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
  4. Wait for lights to turn off then return to normal.
 

Discussion Info


Last updated July 4, 2018 Views 1 Applies to: