DMZ

Motorola - 2210-02  SE Bell Firmware


Login Information

  • Gateway - 192.168.1.254
  • Login Username – N/A
  • Login Password - Access code: Access code is unique to each modem and is printed on the side of the gateway

DMZ

  1. Open a web browser.
  2. Enter 192.168.1.254
  3. Select Local network.
  4. Enter the device access code. (Found on yellow sticker on the bttom of the device)
  5. Select NAT/Gaming.
  6. Select Static NAT.
  7. Choose the device you want to DMZ.
  8. Select next.

 

Disabling DMZ

  1. Open a web browser.
  2. Enter 192.168.1.254
  3. Select Local network.
  4. Enter the device access code. (Found on yellow sticker on the bttom of the device)
  5. Select NAT/Gaming.
  6. Select Static NAT.
  7. Select the drop down and select "OFF"
  8. Select next.

  

Motorola - 2210-02  SW Bell Firmware


Login Information

  • Gateway - 192.168.1.254
  • Login Username – N/A
  • Login Password - Access code: Access code is unique to each modem and is printed on the side of the gateway

 

DMZ

This feature is not available on this device.

 

Discussion Info


Last updated July 4, 2018 Views 2 Applies to: