Bridging Guide

Login Information

  • Gateway - 192.168.1.1
  • Username - admin
  • Password – admin

Bridging

  1. Open a web browser.
  2. Enter http://192.168.1.1 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password.
  3. Click on Quick Setup from the menu on the left.
  4. Click next on the ATM PVC Configuration screen.
  5. On the next page select Bridging for Connection type and for Encapsulation Mode, select LLC/SNAP-BRIDGING and click Next.
  6. Check the box next to Bridge Service and click next.
  7. Uncheck the box that says enable Wireless and click next.
  8. Click Save/Reboot.
  9. If necessary enter the PPPoE information into the router.
 

Discussion Info


Last updated October 19, 2018 Views 15 Applies to: