Wireless Security

Login Information

  • Gateway - 192.168.0.1
  • Username - cusadmin/chtruser/chtrtech
  • Password - password/charter

 

Wireless Passphrase

  1. Open a web browser.
  2. In the address bar at the top type in 192.168.0.1
  3. If asked for a user name and password use (cusadmin/password). If your ISP is Charter you can use chtruser/charter or chtrtech/charter.
  4. In the menu at the top, select Setup.
  5. Under the Wireless section on the left, select Security.
  6. Look to see what type of passphrase is enabled from the four drop-down boxes at the top.
  7. For a WPA key, the passphrase will be listed in the box that says WPA Pre-Shared Key. Verify which key the gateway is using by looking at the drop-down box that says current network key. For a WEP key, look in the box that says Network Key 1.

How to Change Wireless Security

  1. Open a web browser.
  2. In the address bar at the top type in 192.168.0.1
  3. If asked for a user name and password use (cusadmin/password). If your ISP is Charter you can use chtruser/charter or chtrtech/charter.
  4. In the menu at the top, select Setup.
  5. Under the Wireless section on the left, select Security.
  6. Enable desired security type. (WPA-PSK, WPA2-PSK)
  7. To turn off wireless security, select Disabled for all security types.
  8. Select Apply.
 

Discussion Info


Last updated July 4, 2018 Views 7 Applies to: