Bridging Guide

Login Information

  • Gateway - 192.168.1.1
  • Username - (N/A)
  • Password - (N/A)

Bridging Guide

*Bridge mode should only be used if you have a router to plug into the device.*

*Please have PPPoE information available, if you do not have this, please contact your ISP.*

  1. Open a web browser.
  2. Enter http://192.168.1.1 into the address bar. (Or click the link)
  3. Select Quick Setup on the top.
  4. Click the link at the bottom for advanced settings.
  5. Select the “RFC 1483 Transparent Bridging” radio button.
  6. Select Apply.
  7. If necessary enter the PPPoE information into the router.
 

Discussion Info


Last updated July 4, 2018 Views 7 Applies to: