NAT Type (Yes, I read the sticky.)

Alright. Here's the deal. My NAT type has been moderate for quite some time now. I'm pretty knowledgeable about routers and port forwarding and all that jazz. Before giving you my router/modem info, let me tell you everything I've tried to open it up:

Tried opening ports 88, 80, 3074, and 53 (i believe. I opened the right one, I know that), to both UDP and TCP.
uPnP was already enabled. I disabled it, then re-enabled it.
I have reset my router and modem, multiple times.

I have given my Xbox a custom IP, and put in the info manually (Subnet mask, Gateway, etc) in the configure network settings menu on my Xbox. I enabled the port for that specific IP (in my case, 192.168.1.11, compared to my laptop's .50).

 I believe bridging mode is enabled, but to be quite honest I can't find it in my settings.

Alright, so here's the info. I have a cisco M10 Valet wireless router (link here) , connected to a Motorola SURFboard, model SBV5222. (link here).


If your suggestion is to get a new router/modem, that's not happening. Is this even fixable?

 

Question Info


Last updated July 4, 2018 Views 6 Applies to:

Have you try to bypass the router and connect directly to the modem to see if it works?

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

I would, if I had a 400 foot ethernet cable. Sadly, my xbox is nowhere near the modem.

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

Hi,.

If the latest version of firmware on the Cisco and enabling UPnP does not give you an open NAT try this:- www.unofficialguidetolive.co.uk/.../59-my-nat-is-strict-or-moderate

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

I did everything it said. Have to wait an hour or two to reset my router. I'll let you know when I do it. Crossing my fingers!

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

Keep us posted scottyourban! :)

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

Scottyurban, which method did you use in the Cisco- DMZ, Port Forwarding or Port Triggering?

How many Xboxen do you have, just one or more than one?

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

That guide worked, shadow. Thanks so much!

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

Welcome, happy gaming! :)

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.