NAT Issue


So I recently had to reset my modem and redo the settings on both my 360's, I forwarded the appropriate ports, etc. However, while both have the EXACT same settings (the only difference is the IPs (one is .169 and the other .170) and one is on wired, the other wireless), the wireless one is getting the NAT error whenever I test the connection. Prior the the reset of my modem, it was fine, no issue, but now its giving me issues.


Question Info

Last updated July 4, 2018 Views 1 Applies to:

what about a good of fashion switch the router off and on again

when you forward the ports you have to specify the address of the device. I take it you have done this for both .169 & .170?

If you've manually set the xboxes onto a static IP addresses, you could try adding the wireless IP address into the DMZ zone on your router to bypass the firewal

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.