How do we reset windows update components for XP?

I am unable to reset the windows update components in XP for loading the SP3. I found for Vista in Microsoft website. Does any one help with the correct link or the detailed steps for XP OS.
 

Question Info


Last updated April 7, 2019 Views 16,217 Applies to:
Answer
Answer

 "this fixit doesn't apply to your system or XP!!! So I am struck with installing the XP SP3...

Sorry if I am troubling you with my posts....I hope I will find a quick solution. Thank you for the information again... :)


http://windows.microsoft.com/en-us/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3

 

There's no SP3 for the 64-bit version of Windows XP. If you're running the 64-bit version of Windows XP with SP2, you have the latest service pack and will continue to be eligible for support and receive updates until April 8, 2014. To find out what version you're running, see Is my PC running the 32-bit or 64-bit version of Windows?

 

Have you tried manually resetting Windows Updates components ?

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

To reset the Windows Update components, follow these steps:

  1. Open a Windows Command Prompt. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:cmd
  2. Stop the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
    • net stop bits
    • net stop wuauserv
  3. Delete the qmgr*.dat files. To do this, type the following command at a command prompt, and then press ENTER:
    Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"
  4. If this is your first attempt at resolving your Windows Update issues by using the steps in this article, go to step 5 without carrying out the steps in step 4. The steps in step 4 should only be performed at this point in the troubleshooting if you cannot resolve your Windows Update issues after following all steps but step 4. The steps in step 4 are also performed by the "Aggressive" mode of the Fix it Solution above:
    1. Rename the following folders to *.BAK:
      • %systemroot%\SoftwareDistribution\DataStore
      • %systemroot%\SoftwareDistribution\Download
      • %systemroot%\system32\catroot2
      To do this, type the following commands at a command prompt. Press ENTER after you type each command.
      • Ren %systemroot%\SoftwareDistribution\DataStore *.bak
      • Ren %systemroot%\SoftwareDistribution\Download *.bak
      • Ren %systemroot%\system32\catroot2 *.bak
    2. Reset the BITS service and the Windows Update service to the default security descriptor. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
      • sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
      • sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
  5. Type the following command at a command prompt, and then press ENTER:
    cd /d %windir%\system32
  6. Reregister the BITS files and the Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
    • regsvr32.exe atl.dll
    • regsvr32.exe urlmon.dll
    • regsvr32.exe mshtml.dll
    • regsvr32.exe shdocvw.dll
    • regsvr32.exe browseui.dll
    • regsvr32.exe jscript.dll
    • regsvr32.exe vbscript.dll
    • regsvr32.exe scrrun.dll
    • regsvr32.exe msxml.dll
    • regsvr32.exe msxml3.dll
    • regsvr32.exe msxml6.dll
    • regsvr32.exe actxprxy.dll
    • regsvr32.exe softpub.dll
    • regsvr32.exe wintrust.dll
    • regsvr32.exe dssenh.dll
    • regsvr32.exe rsaenh.dll
    • regsvr32.exe gpkcsp.dll
    • regsvr32.exe sccbase.dll
    • regsvr32.exe slbcsp.dll
    • regsvr32.exe cryptdlg.dll
    • regsvr32.exe oleaut32.dll
    • regsvr32.exe ole32.dll
    • regsvr32.exe shell32.dll
    • regsvr32.exe initpki.dll
    • regsvr32.exe wuapi.dll
    • regsvr32.exe wuaueng.dll
    • regsvr32.exe wuaueng1.dll
    • regsvr32.exe wucltui.dll
    • regsvr32.exe wups.dll
    • regsvr32.exe wups2.dll
    • regsvr32.exe wuweb.dll
    • regsvr32.exe qmgr.dll
    • regsvr32.exe qmgrprxy.dll
    • regsvr32.exe wucltux.dll
    • regsvr32.exe muweb.dll
    • regsvr32.exe wuwebv.dll
  7. Reset Winsock. To do this, type the following command at a command prompt, and then press ENTER:
    netsh reset winsock
  8. If you are running Windows XP or Windows Server 2003, you have to set the proxy settings. To do this, type the following command at a command prompt, and then press ENTER:
    proxycfg.exe -d
  9. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
    • net start bits
    • net start wuauserv
  10. If you are running Windows Vista or Windows Server 2008, clear the BITS queue. To do this, type the following command at a command prompt, and then press ENTER:
    bitsadmin.exe /reset /allusers
  11. Install the latest Windows Update Agent. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
    949104 (http://support.microsoft.com/kb/949104/ ) How to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  12. Restart the computer.

 

A place to get FREE support for SP3 installation issues *from Microsoft*...

<http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131>


WinXP SP3 - Read all prerequisites for a successful installation

<http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/windows-xp-sp3-read-all-prerequisites-for-a-successful-installation.aspx>


Steps to take before you install Windows XP Service Pack 3

<http://support.microsoft.com/kb/950717>


Suggestions:


1) Download the full SP3 installation file and/or burn the ISO download to CD.

2) Ensure (as well as plausible) you have no spyware/malware by doing a full scan with SuperAntiSpyware and MalwareBytes.

3) CHKDSK

4) Defragment

5) Ensure your hardware drivers are up to date (from the hardware manufacturer's respective web pages.)

6) Reboot right before you try to install SP3.

7) Disconnect from the internet before installing (physically.)

8) Disable your antivirus and antispyware applications when you are about to install SP3.


Some (if not all) of that is covered in the above links.

UTC/GMT is 23:59 on Thursday, September 15, 2011

Jose Antonio Ponton Posada CEO

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.