Question

Q: Constant Blue Screen Mini Dump in Windows Vista

When I'm at work on our wireless public network, I have connection issues that eventually lead to a blue screen mini dump.  I may stay connected for 4 hours, or 4 minutes....it varies continuously.  I have checked for and updated my NVIDIA driver and have current BIOS. When on my home wireless network (encrypted) I never have this issue.

Error code below:

Problem signature:

Problem Event Name: BlueScreen

OS Version: 6.0.6002.2.2.0.768.3

Locale ID: 1033

Additional information about the problem:

BCCode: 7f

BCP1: 00000000

BCP2: 00000000

BCP3: 00000000

BCP4: 00000000

OS Version: 6_0_6002

Service Pack: 2_0

Product: 768_1

Files that help describe the problem:

C:\Windows\Minidump\Mini110309-02.dmp

C:\Users\Kevin\AppData\Local\Temp\WER-57595-0.sysdata.xml

C:\Users\Kevin\AppData\Local\Temp\WER3DAB.tmp.version.txt

Read our privacy statement:

 

Answer

A:

Hi,

Have you added hardware or updated drivers recently? Check Control Panel - Windows Updates to see
if any drivers have been updated there just before this started happening.

For 7f - this could be a hardware issue such as poorly seated cards or memory, though there are other causes.
Weak powersupply could also lead to this. Use the troubleshooter below and when you get to the drivers and
memory sections refer to my next message and then return to the troubleshooter if needed.

Cause

Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same stack. For example, if two file system filter drivers are attached to the same stack and then the file system recurses back in, the stack overflows.

Resolving the Problem

Troubleshooting: If you recently added hardware to the computer, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. Run hardware diagnostics that the system manufacturer supplies to determine which hardware component failed.

The memory scanner is especially important. Faulty or mismatched memory can cause this bug check. For more informaiton about these procedures, see the owner's manual for your computer. Check that all adapter cards in the computer are properly seated. Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for the BIOS, the SCSI controller, or network cards. These kind of updates are typically available on the Web site or BBS of the hardware manufacturer.

Confirm that all hard disk drives, hard disk controllers, and SCSI adapters are listed in the Microsoft Windows Marketplace Tested Products List.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, under this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console in order to access the file.

Also restart your computer, and then press F8 at the character-based menu that displays the operating system choices. At the Advanced Options menu, select the Last Known Good Configuration option. This option is most effective when you add only one driver or service at a time.

Overclocking (setting the CPU to run at speeds above the rated specification) can cause this error. If you have overclocked the computer that is experiencing the error, return the CPU to the default clock speed setting.

Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing the error. You can also disable memory caching of the BIOS to try to resolve the problem.

If you encountered this error while upgrading to a new version of the Windows operating system, the error might be caused by a device driver, a system service, a virus scanner, or a backup tool that is incompatible with the new version. If possible, remove all third-party device drivers and system services and disable any virus scanners before you upgrade. Contact the software manufacturer to obtain updates of these tools. Also make sure that you have installed the latest Windows Service Pack.

Finally, if all the above steps do not resolve the error, take the system motherboard to a repair facility for diagnostic testing. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

--------------------------------------------------------------------

Look in the Event Viewer to see if anything is reported about those reboots.

http://www.computerperformance.co.uk/vista/vista_event_viewer.htm

-------------------------------------------------------------------------

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen info that would
help. Such as the BCC and the other 4 entries on the lower left. And any other error information such as STOP
codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)
tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000


This is an excellent tool for posting Blue Screen Error Information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information about all crashes in one table - Free
http://www.nirsoft.net/utils/blue_screen_view.html


Many BlueScreens are caused by old or corrupted drivers, especially video drivers however there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or Recovery Options if your
system has that installed by the maker.

This tells you how to access the System Recovery Options and/or from a Vista DVD
http://windowshelp.microsoft.com/Windows/en-US/Help/326b756b-1601-435e-99d0-1585439470351033.mspx

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Vista
http://www.vistax64.com/tutorials/76905-system-restore-how.html

-------------------------------------------------------------------------

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.microsoft.com/kb/928228


The log might give you the answer if there was a corrupted driver. (Does not tell all the possible driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.
How to Run Check Disk at Startup in Vista
http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html


-------------------------------------------------------------------------

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party keyboard and
mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

How to Install a Device Driver in Vista Device Manager
http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors
http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages
http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors
http://kb.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases this might be required.

StartUp Repair from Recovery Options or Vista disk

How to do a Startup Repair
http://www.vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or from a Vista DVD
http://windowshelp.microsoft.com/Windows/en-US/Help/326b756b-1601-435e-99d0-1585439470351033.mspx

Hope this helps.


Rob - Bicycle - Mark Twain said it right.
Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

Did this solve your problem?

Sorry this didn't help.



 
Question Info

Views: 5,779 Last updated: May 17, 2018 Applies to: