Blue Screen EVENT ID:10

hello,__Blue Screen problem.__EVENT ID:10__EVENT ID:3012 SOURCE:LoadPerf__EVENT ID:3011 SOURCE:LoadPerf __

Log Name:      Application
Source:        Microsoft-Windows-WMI
Date:          4/21/2010 10:59:53 PM
Event ID:      10
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SNIPER-PC
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
    <EventID Qualifiers="49152">10</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-04-21T17:29:53.000Z" />
    <EventRecordID>40570</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SNIPER-PC</Computer>
    <Security />
  </System>
  <EventData>
    <Data>//./root/CIMV2</Data>
    <Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage &gt; 99</Data>
    <Data>0x80041003</Data>
  </EventData>
</Event>

Log Name:      Application
Source:        Microsoft-Windows-LoadPerf
Date:          4/21/2010 11:03:54 PM
Event ID:      3012
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SNIPER-PC
Description:
The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the Data section.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-LoadPerf" Guid="{122EE297-BB47-41AE-B265-1CA8D1886D40}" EventSourceName="LoadPerf" />
    <EventID Qualifiers="49152">3012</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-04-21T17:33:54.000Z" />
    <EventRecordID>40576</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SNIPER-PC</Computer>
    <Security />
  </System>
  <UserData>
    <EventXML xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="LoadPerf">
      <param1>Performance</param1>
      <binaryDataSize>16</binaryDataSize>
      <binaryData>37070000000000000000000015030000</binaryData>
    </EventXML>
  </UserData>
</Event>

Log Name:      Application
Source:        Microsoft-Windows-LoadPerf
Date:          4/21/2010 11:03:54 PM
Event ID:      3011
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SNIPER-PC
Description:
Unloading the performance counter strings for service WmiApRpl (WmiApRpl) failed. The first DWORD in the Data section contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-LoadPerf" Guid="{122EE297-BB47-41AE-B265-1CA8D1886D40}" EventSourceName="LoadPerf" />
    <EventID Qualifiers="49152">3011</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-04-21T17:33:54.000Z" />
    <EventRecordID>40577</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SNIPER-PC</Computer>
    <Security />
  </System>
  <UserData>
    <EventXML xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="LoadPerf">
      <param1>WmiApRpl</param1>
      <param2>WmiApRpl</param2>
      <binaryDataSize>8</binaryDataSize>
      <binaryData>F203000066070000</binaryData>
    </EventXML>
  </UserData>
</Event>

Solutions please!!!

 

Question Info


Last updated December 10, 2019 Views 5,200 Applies to:
Answer
Answer

Hi,

There may be a more specific fix gleaned from the info above but here are some general TS steps for BSOD. It includes basically all the steps up to and including running a clean install and diagnosing and replacing faulty hardware. Use these steps but if somebody has a more targeted fix for your issue, of course try that as well:

 

A crash can be caused by a number of things, including:

·         An outdated or misbehaving device driver,

·         A computer virus,

·         A corrupted program, or

·         A problem with your computer's memory.

·         Hard disk  or motherboard is corrupted

 

I would suggest you to try the following steps:

Step 1: Try to boot the computer in safe mode and check if the issue persists:

 a. Restart your computer and start pressing the F8 key on your keyboard. On a computer that is configured for booting to multiple operating systems, you can press the F8 key when the Boot Menu appears.

b. Select an option when the Windows Advanced Options menu appears, and then press ENTER.

c. When the Boot menu appears again, and the words "safe mode” appear at the bottom, select the installation that you want to start, and then press ENTER.

If the computer works fine in safe mode, you can infer that some third party software is causing the issue.

Step 2: Put the computer in clean boot (to figure out if any third party software is hindering the process)     

   http://support.microsoft.com/kb/929135    ----> How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Perform a clean boot (check step 1 of the link); if everything works fine after a clean boot, you can infer that some third party services are causing the problem.

Proceed with the remaining steps to pin-point out the third party service.

Note: After you figure out the problem causing program, you may have to update or install a higher version of the program, if you seldom use that software you can consider uninstalling

Important: - remember to put the computer back to normal startup follow step 7 in the link.

 If the issue persists,

Step 3: Try to install the latest drivers for all the devices via windows update or check the device manufacturer’s website.

1.         Open Windows Update by clicking the Start button, clicking All Programs, and then clicking Windows Update.

2.         In the left pane, click Check for updates.

 

Install all the important and recommended updates.

Step 4: Check if RAM sticks are working fine; follow the steps mentioned in the link below

http://windows.microsoft.com/en-us/windows-vista/How-do-I-know-if-my-computer-has-a-memory-problem

 

Step 5: Check your hard disk for errors; follow the steps mentioned in the link below

http://windows.microsoft.com/en-us/windows-vista/Check-your-hard-disk-for-errors

 

If the issue still persists,

 

Step 6: Run an online scan for any threat and try to fix them

http://onecare.live.com/site/en-Us/center/cleanup.htm

 

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

http://support.microsoft.com/kb/958233

 

How to repair the operating system and how to restore the operating system configuration to an earlier point in time in Windows Vista

http://support.microsoft.com/kb/936212/

 

 

How to troubleshoot a problem by performing a clean boot in Windows Vista

http://support.microsoft.com/kb/929135

 

 

Step 7: You may consider flashing\updating the BIOS (Basic input output system)

 

Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Please check with your computer manufacturer for flashing the BIOS. 

 

Hope this helps,

 

Steve <> Microsoft Partner

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.