facing 'Power calibration error' while trying to burn cd or dvd on windows 7..

Hello..

 

i am facing errors while trying to burn a cd or dvd using Nero10 .. i tried with updating the driver s/w , burning at different speeds but did not work..

on googling i found that this  problem in windows xp got resolved by disabling by IMAPI service but i could not locate in my windows 7 basic version..

pls let me know how to resolve this..

Power calibration error

E: MATSHITA DVD-RAM UJ890AS

 19:55:58 #36 PHASE 181 File dlgbrnst.cpp, Line 1827

Writing lead-out...

 19:55:58 #37 SPTI -1106 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)..

 

complete log file is..

 

 

9X0C-004C-AXCP-797C-7ET6-C723-****-****

Windows 7 6.1

AMD64

Wow64Process

Nero Version: 10.2.12.100

Internal Version: 10,2,12,100

Recorder: <MATSHITA DVD-RAM UJ890AS>Version: 1.00 - HA 1 TA 0 - 10.2.12.100

Adapter driver: <Serial ATA> HA 1

Drive buffer : 1024kB

Bus Type : via Inquiry data

CD-ROM: <ELBY CLONEDRIVE >Version: 1.4 - HA 1 TA 1 - 10.2.12.100

Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : TOSHIBA MK3265GSX iaStor Port 0 ID 0 DMA: On

CdRomPeripheral : MATSHITA DVD-RAM UJ890AS iaStor Port 0 ID 1 DMA: Off

CdRomPeripheral : ELBY CLONEDRIVE 1.4 VClone Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===

MATSHITA DVD-RAM UJ890AS E: CdRom0

ELBY CLONEDRIVE G: CdRom1

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 2990MB (3061860kB)

Free physical memory: 1699MB (1739884kB)

Memory in use : 43 %

Uncached PFiles: 0x0

Global Bus Type: default (0)

Check supported media : Disabled (0)

21.8.2011

ISO compilation

19:54:06 #1 Text 0 File SCSIPTICommands.cpp, Line 464

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

19:54:06 #2 Text 0 File Isodoc.cpp, Line 7008

Iso document burn settings

------------------------------------------

Determine maximum speed : TRUE

Simulate : FALSE

Write : TRUE

Finalize CD : FALSE

Multisession : TRUE

Multisession type: : Start multisession

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

 

19:54:07 #3 ISO9660GEN -11 File Geniso.cpp, Line 3336

First writeable address = 0 (0x00000000)

 

19:54:08 #4 Text 0 File Burncd.cpp, Line 3521

Turn on Disc-At-Once, using DVD media

 

19:54:09 #5 Text 0 File Cdrdrv.cpp, Line 10512

---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 26127F h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: 6.0

Revision number of minimum recording speed: -

Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -

Class: 0, Extended part version: 33

Start PSN of the Extra Border Zone: 2FE10 h

Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h

Media Specific [16..783]:

00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

 

19:54:09 #6 Text 0 File DlgWaitCD.cpp, Line 314

[E: DVD-RAM UJ890AS ] Last possible write address on media: 2298495

Last address to be written: 321119

 

19:54:09 #7 Text 0 File DlgWaitCD.cpp, Line 326

[E: DVD-RAM UJ890AS ] Write in overburning mode: NO (enabled: CD)

 

19:54:09 #8 Text 0 File DlgWaitCD.cpp, Line 2917

Recorder: MATSHITA DVD-RAM UJ890AS, Media type: DVD-R

Disc Manufacturer ID: <MBI 01> <RG40>

Disc Application Code: 64, Disc Physical Code: 193

 

19:54:09 #9 Text 0 File DlgWaitCD.cpp, Line 499

[E: DVD-RAM UJ890AS ] >>> Protocol of DlgWaitCD activities: <<<

=========================================

 

19:54:09 #10 Text 0 File ThreadedTransferInterface.cpp, Line 861

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 321120 (321120) = #321120/71:21.45

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 321120 blocks [E: MATSHITA DVD-RAM UJ890AS]

--------------------------------------------------------------

 

19:54:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1077

Prepare [E: MATSHITA DVD-RAM UJ890AS] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc not fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 657653760, ISRC ""

DAO layout:

===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 321120 | 0 | 0x00

321120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

MediaType: DVD-R

 

19:54:09 #12 Text 0 File SCSIPTICommands.cpp, Line 251

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

 

19:54:09 #13 Text 0 File Burncd.cpp, Line 4234

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

 

19:54:09 #14 PHASE 24 File dlgbrnst.cpp, Line 1827

Caching of files started

 

19:54:09 #15 Text 0 File Burncd.cpp, Line 4356

Cache writing successful.

 

19:54:09 #16 PHASE 25 File dlgbrnst.cpp, Line 1827

Caching of files completed

 

19:54:09 #17 PHASE 28 File dlgbrnst.cpp, Line 1827

Maximum transfer rate test started

 

19:54:09 #18 Text 0 File Cdrdrv.cpp, Line 10512

---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 26127F h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: 6.0

Revision number of minimum recording speed: -

Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -

Class: 0, Extended part version: 33

Start PSN of the Extra Border Zone: 2FE10 h

Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h

Media Specific [16..783]:

00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

 

19:54:09 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2850

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

 

19:54:09 #20 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 590400

 

19:55:39 #21 Text 0 File WriterStatus.cpp, Line 244

<E: MATSHITA DVD-RAM UJ890AS> start writing Lead-Out at LBA 321120 (4E660h), length 0 blocks

 

19:55:39 #22 PHASE 29 File dlgbrnst.cpp, Line 1776

Maximum transfer rate test completed: 5.1x (7,132 KB/s)

 

19:55:39 #23 Text 0 File Burncd.cpp, Line 4430

Can only write at 6x instead of 8x,

because speed of source data is too slow

 

19:55:39 #24 PHASE 36 File dlgbrnst.cpp, Line 1827

Burn process started at 6x (8,310 KB/s)

 

19:55:39 #25 Text 0 File Cdrdrv.cpp, Line 10512

---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 26127F h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: 6.0

Revision number of minimum recording speed: -

Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -

Class: 0, Extended part version: 33

Start PSN of the Extra Border Zone: 2FE10 h

Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h

Media Specific [16..783]:

00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


 

19:55:39 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2850

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

 

19:55:39 #27 Text 0 File Cdrdrv.cpp, Line 10512

---- Disc Structure: Physical Format Information of Control Data Zone in the Lead-in (10h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 26127F h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: 6.0

Revision number of minimum recording speed: -

Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -

Class: 0, Extended part version: 33

Start PSN of the Extra Border Zone: 2FE10 h

Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h

Media Specific [16..783]:

00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

 

19:55:39 #28 Text 0 File DVDR.cpp, Line 3101

Recording mode: Sequential Recording Mode for Multisession

 

19:55:39 #29 Text 0 File DVDR.cpp, Line 3259

Start write address at LBA 0

DVD high compatibility mode: Yes

 

19:55:39 #30 SPTI -1066 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

Buffer x0d86b580: Len x648

 

19:55:39 #31 Text 0 File Cdrdrv.cpp, Line 10512

---- Disc Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)

Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

Outer Limit of Data Recordable Area: 30000 h

Data in Burst Cutting Area (BCA) does not exist

Revision number of maximum recording speed: 6.0

Revision number of minimum recording speed: -

Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -

Class: 0, Extended part version: 33

Start PSN of the Extra Border Zone: 0 h

Start PSN of Physical format information blocks in Extra Border Zone: 0 h

Media Specific [16..783]:

00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....

 

19:55:39 #32 Text 0 File ThreadedTransfer.cpp, Line 273

Pipe memory size 83836800

 

19:55:58 #33 SPTI -1106 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 19 25 73 03

Buffer x10010040: Len x10000

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

19:55:58 #34 TRANSFER -60 File ThreadedTransfer.cpp, Line 1222

 

19:55:58 #35 CDR -1106 File Writer.cpp, Line 335

Power calibration error

E: MATSHITA DVD-RAM UJ890AS

 

19:55:58 #36 PHASE 181 File dlgbrnst.cpp, Line 1827

Writing lead-out...

 

19:55:58 #37 SPTI -1106 File SCSIPassThrough.cpp, Line 224

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

CDB Data: 0x5B 01 02 00 00 02 00 00 00 00 00 00

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 19 25 73 03

 

19:55:58 #38 Text 0 File DVDR.cpp, Line 3712

EndDAO: Last written address was -1 (FFFFFFFFh)Close Session/Border, function 2, track: 2, finalize disc: NO, ret: -1106

 

19:55:58 #39 CDR -1106 File WriterStatus.cpp, Line 291

Power calibration error

E: MATSHITA DVD-RAM UJ890AS


19:55:58 #40 TRANSFER -24 File ThreadedTransfer.cpp, Line 1222

Could not perform end of Disc-at-once

 

19:55:58 #41 Text 0 File DVDPlusDualLayer.cpp, Line 1460

SetDriveCaps: Set LAST LBA of layer 1 to 0

 

19:55:58 #42 PHASE 38 File dlgbrnst.cpp, Line 1827

Burn process failed at 6x (8,310 KB/s)

 

19:55:58 #43 Text 0 File SCSIPTICommands.cpp, Line 301

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

 

19:55:58 #44 Text 0 File Cdrdrv.cpp, Line 11882

DriveLocker: UnLockVolume completed

 

19:55:58 #45 Text 0 File SCSIPTICommands.cpp, Line 464

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTRO


 

Answer
Answer

Hi Rkrushna,

 

It doesn’t appear that you can disable IMAPI in Windows 7 as you could in Windows XP services.

 

You may take a look at some of Spirit X’s suggestions here in the mentioned link:

 

http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/power-calibration-area-error/4f2e113c-01af-465d-9e30-b6246d29ba96

 

Note: Even though the thread if for Windows Vista still applicable for Windows 7 as well.

 

Disclaimer: Using Third Party Software or Link, including hardware drivers can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the use of Third Party Software or Link can be solved. Using Third Party Software or Link is at your own risk.

 

Hope this helps.

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

 
 

Question Info


Last updated July 19, 2020 Views 6,464 Applies to: