Stop error code d1. Completely stumped.

I recently put together a new gaming computer and I've been having blue screens from day 1 (among other problems) I brought it back to canada computers (where I got all the parts, they also assembled it). They ran a whole bunch of tests on all the hardware without any problem. I bring it home, start getting my files back from my external hard drive, reinstalling my programs, then the computer Blue screens. I've been getting about 3+ BSODs a DAY since the first one (3 days ago). I tried following other threads and using WinDbg and for some reason I keep getting the error message "Module load completed but symbols could not be loaded for jraid.sys" Bellow is the Windbg command prompt, any help is greatly appreciated :)

Wesley

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols;symsrv*symsrv.dll*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02a49000 PsLoadedModuleList = 0xfffff800`02c86e50
Debug session time: Fri Jan 28 19:25:37.534 2011 (UTC - 5:00)
System Uptime: 0 days 0:05:25.235
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
PEB is paged out (Peb.Ldr = 00000000`7efdf018).  Type ".hh dbgerr001" for details
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffffa8005218eca, 7, 0, fffff88000dd7356}

*** ERROR: Module load completed but symbols could not be loaded for jraid.sys
Probably caused by : jraid.sys ( jraid+4356 )

Followup: MachineOwner
---------

 

Question Info


Last updated November 6, 2019 Views 2,207 Applies to:
Answer
Answer

Hi,

Two Bug_Checks 7A (1) and a bunch of D1.

First unload PCTools and use something more compatible, check PCTools Support and Documentation.
PCTools seems to be aggravating the issues and it is known for causing some strange issues and slow-
downs. Below are recommendations to use while testing, even better permanently.

PCTools - Support
http://www.pctools.com/support/

PCTools - Forums
http://www.pctools.com/forum/

This may help :

How to Remove PC Tools
http://www.ehow.com/how_4686060_remove-pc-tools.html

------------------------------------

Here is what I use and recommend : (These are all Free versions and very effective.) 

Avast and Prevx have proven extremely reliable and compatible with everything I have
thrown at them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE and Prevx or Avast and Prevx however not all 3.

Avast Home Free - stop any shields you do not need except leave Standard, Web, and
Network running.

Prevx - Home - Free

Windows Firewall

Windows Defender (not needed if using MSE)

IE - Protected Mode

IE 8 - SmartScreen Filter ON  (IE 7 Phishing Filter)

I also have IE to always start with InPrivate Filter active if IE 8.
(You occasionally have to turn it temporarily off with the little Icon on LEFT of the + bottom
right of IE)

Two versions of Avast are available 5.x and 4.8x

Avast 5.x - Home - Free - Stop the Shields you do not use (except File, Web, Network, &
Behavior) - double click the Orange Icon in Notification Area - Real Time Shields - click the
Shield you want to stop - STOP. To stop the Orange Icon from showing an error indicator -
click the Orange Icon - Upper Right - Settings - click Status Bar - uncheck the Shields you
disabled - click OK
http://www.avast.com/free-antivirus-download

Avast 4.8x - Home - Free - stop any shields you do not need except leave Standard, Web,
and Network running. (Double Click Blue icon - details next to OK. - upper left Shields -
Terminate those you do not use.)
http://www.avast.com/free-antivirus-download#tab4

Or use Microsoft Security Essentials - Free
http://www.microsoft.com/Security_Essentials/

Prevx works well along side Avast or MSE

Prevx - Home - Free small, fast, exceptional CLOUD protection, works with other security
programs. This is a scanner only, VERY EFFECTIVE, if it finds something come back here
or use Google to see how to remove. 
http://www.prevx.com/   <-- information
http://info.prevx.com/downloadcsi.asp  <-- download

PCmag - Prevx - Editor'a Choice
http://www.pcmag.com/article2/0,2817,2346862,00.asp

Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that
would be unsual with Avast and Prevx running except for an occasional low level cookie
(no big deal), UPDATE it and then run it as a scanner. I have many scanners and they
never find anything of note since I started using this setup.

http://www.malwarebytes.org/

=============================================================

Besides the influence of PCTools update the network drives NIC and WiFi - check the motherboard
maker if on-board and the actual device makers' sites if separate devices. Also check the mother-
board maker for updated BIOS and low level chipset drivers.

The RAID drivers were also the CAUSE of some of these so look for updated to those. It is very
likely that PCTools also has a role in these at least by aggavation. Look for updates to JRAID.sys
and check with its developer's support (source of the drivers).


==============================================================

The 7A CAUSE was MEMORY CORRUPTION so test the MEMORY thoroughly using the methods below.
Since there was only 1 7A Bug_Check the MEMORY may or maynot of had any influence on the D1's.

===============================================================

BCCode: D1     0x000000D1

Check these KB's

Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or from hibernation: "STOP: 0x000000D1"
http://support.microsoft.com/kb/978982

Stop error on a Windows Server 2008 R2-based or Windows 7-based computer when the operating
system uses a virtual storport miniport driver to save a dump file or a hibernation file: "0x000000D1"
http://support.microsoft.com/kb/2320550

Those and 7 other KB Articles are available
http://support.microsoft.com/search/default.aspx?mode=a&query=0x000000D1&spid=14019&catalog=LCID%3D1033&1033comm=1&res=10

--------------------------------------------------

Think Video drivers mainly though it can be others. See the driver section in my generic bluescreen
troubleshooting methods below. BIOS, low level chipset drivers and antivirus/antispyway/security
programs can also cause this. Check the troubleshooter and when you get to the driver and memory testing sections refer to the generic methods in next message and then return to the troubleshooter
if needed.


Cause

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high.

This bug check is usually caused by drivers that have used improper addresses.

If the first parameter has the same value as the fourth parameter, and the third parameter indicates an execute operation, this bug check was likely caused by a driver that was trying to execute code when the code itself was paged out. Possible causes for the page fault include the following:

  • The function was marked as pageable and was running at an elevated IRQL (which includes obtaining a lock).
  • The function call was made to a function in another driver, and that driver was unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

BCCode: d1   0x000000d1  <-- read this link
http://www.faultwire.com/solutions-fatal_error/DRIVER-IRQL-NOT-LESS-OR-EQUAL-0x000000D1-*1210.html?order=votes

===============================================================

BCCode: 7A    0x0000007A


The primary causes of this error are virus/malware, drivers, memory, and disk corruption. And there
can even be combinations of those so a thorough check of all is required. Added possible causes are
hardware errors such as damaged motherboard or other hardware. The hard drive is very suspect.

BCCode: 7A    0x0000007A

Cause

Frequently, you can determine the cause of the KERNEL_DATA_INPAGE_ERROR bug check from the error status (Parameter 2). Some common status codes include the following:

  • 0xC000009A, or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of nonpaged pool resources.

  • 0xC000009C, or STATUS_DEVICE_DATA_ERROR, typically indicates bad blocks (sectors) on the hard disk.

  • 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose cabling, termination, or that the controller does not see the hard disk.

  • 0xC000016A, or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.

  • 0xC0000185, or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling on SCSI devices or that two devices are trying to use the same IRQ.

 

These status codes are the most common ones that have specific causes. For more information about other possible status codes that can be returned, see theNtstatus.h file in the Microsoft Windows Driver Kit (WDK).

Another common cause of this error message is defective hardware or failing RAM.

A virus infection can also cause this bug check.

Resolution

Resolving a bad block problem: An I/O status code of 0xC000009C or 0xC000016A typically indicates that the data could not be read from the disk because of a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and attempts to map the bad sector to prevent it from being used anymore.

If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. RunChkdsk /f /r on the system partition. You must restart the computer before the disk scan begins. If you cannot start the computer because of the error, use the Recovery Console and runChkdsk /r.

Warning   If your system partition is formatted with the FAT file system, the long file names that the Windows operating system uses might be damaged if you use Scandisk or another MS-DOS-based hard disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

Resolving a defective hardware problem: If the I/O status is C0000185 and the paging file is on an SCSI disk, check the disk cabling and SCSI termination for problems.

Resolving a failing RAM problem: Run the hardware diagnostics that the system manufacturer supplies, especially the memory scanner. For more information about these procedures, see the owner's manual for your computer.

Check that all the adapter cards in the computer are properly seated. Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure adapter card contacts are clean.

Check the System Log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable memory caching of the BIOS to try to resolve this error.

Make sure that the latest Windows Service Pack is installed.

If the preceding steps do not resolve the error, take the system motherboard to a repair facility for diagnostic testing. A crack, a scratched trace, or a defective component on the motherboard can cause this error.

Resolving a virus infection: Check your computer for viruses by using any up-to-date, commercial virus scanning software that examines the Master Boot Record of the hard disk. All Windows file systems can be infected by viruses.

BCCode: 7A    0x0000007A  <-- read this link
http://www.faultwire.com/solutions-fatal_error/KERNEL-DATA-INPAGE-ERROR-0x0000007A-*1137.html?order=date

===============================================================
===============================================================

Look in the Event Viewer to see if anything is reported about those.
http://www.computerperformance.co.uk/vista/vista_event_viewer.htm

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.
TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.

http://www.nirsoft.net/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen
info that would help. Such as the BCC and the other 4 entries on the lower left. And any other
error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)
tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000


This is an excellent tool for posting Blue Screen Error Information

BlueScreenView scans all your minidump files created during 'blue screen of death'
crashes, and displays the information about all crashes in one table - Free

http://www.nirsoft.net/utils/blue_screen_view.html


Many BlueScreens are caused by old or corrupted drivers, especially video drivers however
there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or
Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7
http://www.sevenforums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log (and Windows 7)
http://support.microsoft.com/kb/928228


The log might give you the answer if there was a corrupted driver. (Does not tell all the possible
driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7
http://www.sevenforums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party
keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in 7 (updating drivers manually using the methods above is preferred
to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
unexpectedly
http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)
http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages
http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors
http://kb.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7
http://www.sevenforums.com/tutorials/681-startup-repair.html

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html

How to Create a Windows 7 System Repair Disc
http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

Hope this helps.


Rob Brown - Microsoft MVP - Windows Expert - Consumer : Bicycle - Mark Twain said it right.
Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.