Question
Applies to
120 views

Experincing Blue Screen error !

nitish_hm asked on

I was getting screen resolution problem & replaced mine motherboard from asus.

I am experiencing bluescreen error after getting mine motherboard replaced by service centre.
Have visited the service centre but they can't find the problem.

I am having the dump file with me but dont know how to recognize problem from that.
Can anyone help me??
I am using Windows 7 Pro -x86 , Asus m4a78l-t-mle motherboard, Amd athlon xII processor.


1 person had this question

Abuse history


The answered status icon Answer
Patrick Barker replied on

If your system is crashing within the BIOS, this is certainly a hardware issue. I would go ahead and begin with hardware diagnostics, starting with a Memtest for NO LESS than ~8 passes (several hours), and then chkdsk (paste log afterwards) and Seatools:

Memtest86+:

Download Memtest86+ here:

http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:

http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

-------------------------------------------------------------------------------------------------------------

Chkdsk:

Chkdsk:
There are various ways to run Chkdsk~


Method 1:

Start > Search bar > Type cmd (right click run as admin to execute Elevated CMD)

Elevated CMD should now be opened, type the following:

chkdsk x: /r

x implies your drive letter, so if your hard drive in question is letter c, it would be:

chkdsk c: /r

Restart system and let chkdsk run.

Method 2:


    Open the "Computer" window
    Right-click on the drive in question
    Select the "Tools" tab
    In the Error-checking area, click <Check Now>.

If you'd like to get a log file that contains the chkdsk results, do the following:

Press Windows Key + R and type powershell.exe in the run box

Paste the following command and press enter afterwards:

get-winevent -FilterHashTable @{logname="Application"; id="1001"}| ?{$_.providername –match "wininit"} | fl timecreated, message | out-file Desktop\CHKDSKResults.txt

This will output a .txt file on your Desktop containing the results of the chkdsk.

If chkdsk turns out okay, run Seatools -

http://www.seagate.com/support/downloads/seatools/

You can run it via Windows or DOS. Do note that the only difference is simply the environment you're running it in. In Windows, if you are having what you believe to be device driver related issues that may cause conflicts or false positive, it may be a wise decision to choose the most minimal testing environment (DOS).

Run all tests EXCEPT: Fix All, Long Generic, and anything Advanced.

Regards,

Patrick
Debugger/Reverse Engineer.
1 person found this helpful

Abuse history


progress