Blue screen error A problem has been detected and windows has been shutdown to prevent damage to your computer."...*** STOP: 0x000000A5 (0x00000011, 0x00000000006, 0x000000000, 0x000000000)

Original title : After I install Win7 on my, it appear blue screen" ....The BIOS in this system is not full ACPI complain...''

 

After I install Win7 on my, it appear blue screen" A problem has been detected and windows has been shutdown to prevent damage to your computer....The BIOS in this system is not full ACPI complain.......*** STOP: 0x000000A5 (0x00000011, 0x00000000003, 0x000000000, 0x000000000)''. I don't know how to solve it. Someone can help me.

 

Question Info


Last updated May 21, 2019 Views 18,376 Applies to:
Answer
Answer

Hi kimchongseng,

 

Thank you for posting in the Microsoft Community. I’m sorry to know that you have issues with blue screen error on the computer.

 

I’m glad to provide you with these steps which will help you to resolve issue with blue screen error on the computer.

 

Method 1:

A "Stop: 0x000000A5" error message typically indicates that the computer Basic Input/Output System (BIOS)  is incompatible with the Advanced Configuration and Power Interface (ACPI) standard that is supported in Windows 7. However, this error can also occur because the computer hardware, the peripherals, or the drivers for those devices are incompatible with Windows 7.

I suggest you to contact the computer manufacturer for information about how to obtain and to install a BIOS update.

 BIOS DISCLAIMER:

 Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

 

Method 2:

Unplug all external devices and try booting the computer and check if the issue persists.

 

Method 3:

Step 1:

Restart computer in safe mode and check if the issue occurs follow the steps in the link:

“Start your computer in safe mode”

http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

Step 2:

If safe mode works, restart computer in clean boot and check if any third party application is causing issue. Follow “step 1” in the link to enable to clean boot:

http://support.microsoft.com/kb/929135

Follow step 3 from the article to “Reset the computer to start as usual”, after performing the clean boot troubleshooting.

 

Method 4:

You may perform startup using  Windows 7 installing disc. Follow the steps in the link:

“Startup Repair”

http://windows.microsoft.com/en-US/windows7/products/features/startup-repair

Note: To start the computer from the Windows Vista or Windows 7 DVD, the computer must be configured to start from the DVD drive.

 

Method 5:

Follow the steps in the link:

“Resolving stop (blue screen) errors in Windows 7”

http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

Note: Ignore the step Reinstall Windows 7 from the above link.

Chkdsk disclaimer:

While performing chkdsk on the hard drive if any bad sectors are found on the hard drive when chkdsk tries to repair that sector if any data available on that might be lost.

Hope the information helps. If you need further assistance, please reply. We will be happy to help you.

2 people were helped by this reply

·

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.