BlueScreen Error: 0x00000135

original title: BlueScreen

Hi,

I have tried to install Cakewalk Sonar home studio 7 to my pc(Acer Aspire desktop).When installing is at "registering files" display goes blue and then safemode.Problem description:>This bugcheck is caused by unhandled exception in registry driver.
>Check to make sure any new hardware or software is properly installed.If this is new installation ask your manufacturer for any windows updates you might need.
>If problems continue,disable or remove any newly installed hardware or software.Disable biosmemory options such as caching or shadowing.
>If you need to use safemode to remove or disable components,restart your computer,press f8 to select advanced startup options and then select safemode.
>Technical information:
>^^^stop:0x00000135(0xFFFFFFFFC0000005,0xFFFFF8800FAEE90,FFFFF880010E06D8,0xFFFFF8A0001DAF40)^^^TFSysMon.Sys-AddressFFFFF880010Eo6D8Base at FFFFF880010DB000,DateStamp4afae 430.
Cakewalk technical support have not been able to solve this problem and i´m very gratefull,if somebody can help me.

 

Question Info


Last updated September 18, 2018 Views 11,120 Applies to:
Answer

Hi,

Check this thead for information on using BlueScreenView, MyEventViewer and other methods to
troubleshoot BlueSceens - top 3 replies.

http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

-----------------------------------------------------------------------------------------------------------

Since you know it is a conflict with Cakewalk Sonar at least in part then removing it if possible
would be a start. Also you can troubleshoot the issues using these methods.

Stop Code 0x00000135  <-- read this
http://www.faultwire.com/solutions-fatal_error/This-bugcheck-is-caused-by-an-unhandled-exception-in-a-0x00000135-*1342.html?order=votes

1. Last Known Good Configuration - repeatedly tap F8 as you boot.

2. Do a thorough check for malware - see below.

3. Check for updated drivers and BIOS - see below.

4. Uninstall the last install - you already know what that is.

-------------------------------------------------------------------

If you need to check for malware here are my recommendations - these will allow you to do
a thorough check and removal without ending up with a load of spyware programs running
resident which can cause as many issues as the malware and maybe harder to detect as the
cause.

No one program can be relied upon to detect and remove all malware. Added that often easy
to detect malware is often accompanied by a much harder to detect and remove payload. So
its better to be overly thorough now than to pay the high price later. Check with these to an
extreme overkill point and then run the cleanup only when you are very sure the system is clean.

These can be done in Safe Mode - repeatedly tap F8 as you boot however you should also run 
them in regular Windows when you can.

Download malwarebytes and scan with it, run MRT, and add Prevx to be sure it is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN

Malwarebytes - free
http://www.malwarebytes.org/

Run the Microsoft Malicious Removal Tool

Start - type in Search box -> MRT  find at top of list - Right Click on it - RUN AS ADMIN.

You should be getting this tool and its updates via Windows Updates - if needed you can
download it here.

Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN
(Then run MRT as above.)

Microsoft Malicious Removal Tool - 32 bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious Removal Tool - 64 bit
http://www.microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure it is all gone.

Download - SAVE - go to where you put it - Right Click on it - RUN AS ADMIN

Prevx - Home - Free - small, fast, exceptional CLOUD protection, works with other
security programs. This is a scanner only, VERY EFFECTIVE, if it finds something come back
here or use Google to see how to remove. 
http://www.prevx.com/   <-- information
http://info.prevx.com/downloadcsi.asp  <-- download

PCmag - Prevx - Editor's Choice
http://www.pcmag.com/article2/0,2817,2346862,00.asp

Try the trial version of Hitman Pro :

Hitman Pro is a second opinion scanner, designed to rescue your computer from malware
(viruses, trojans, rootkits, etc.) that have infected your computer despite all the security
measures you have taken (such as anti virus software, firewalls, etc.).
http://www.surfright.nl/en/hitmanpro

--------------------------------------------------------

If needed here are some online free scanners to help

http://www.eset.com/onlinescan/

http://onecare.live.com/site/en-us/default.htm

http://www.kaspersky.com/virusscanner

Other Free online scans
http://www.google.com/search?hl=en&source=hp&q=antivirus+free+online+scan&aq=f&oq=&aqi=g1

--------------------------------------------------------

After removing any malware :

Also do these to cleanup general corruption and repair/replace damaged/missing
system files. Once any malware is removed these should help restore WMP.


Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.microsoft.com/kb/928228


Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Disk Check in Windows 7
http://www.sevenforums.com/tutorials/433-disk-check.html

-----------------------------------------------------------------------

If any Rootkits are found use this thread and other suggestions. (Run UnHackMe)

http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/a8f665f0-c793-441a-a5b9-54b7e1e7a5a4/

=====================================================

Vista and Windows 7 love updated drivers so here is how to update the major ones.

References to Vista also apply to Windows 7.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView - Free - utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
description, version, product name, company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker's which are the most current.
Control Panel - Device Manager - Display Adapter - write down the make and complete model
of your video adapter - double click - Driver's tab - write down the version info. Now click UPdate
Driver (this may not do anything as MS is far behind certifying drivers) - then Right Click -
Uninstall - REBOOT this will refresh the driver stack.

Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party
with their own software and drivers and any other major device drivers you have.

Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and then Device
Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for
BIOS, Chipset and software updates at System Maker's site while there.)

Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN - REBOOT after
each installation.

Always check in Device Manager - Drivers tab to be sure the version you are installing actually
shows up. This is because some drivers rollback before the latest is installed (sound drivers
particularly do this) so install a driver - reboot - check to be sure it is installed and repeat as
needed.

Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER - check
manually by model.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in Windows 7 (updating drivers manually using the methods above
is preferred to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update drivers manually then it is a good idea to disable Driver Installations in Windows
Updates, this leaves Windows Updates ON however it will not install drivers which will usually be
older and cause issues. If Updates suggests a new driver then HIDE it (Right Click on it) and then
go look for new ones manually if you wish.

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

Hope this helps.


Rob Brown - MS MVP - Windows Desktop Experience : Bicycle - Mark Twain said it right.
Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.

Answer
>^^^stop:0x00000135(0xFFFFFFFFC0000005,0xFFFFF8800FAEE90,FFFFF880010E06D8,0xFFFFF8A0001DAF40)^^^TFSysMon.Sys-AddressFFFFF880010Eo6D8Base at FFFFF880010DB000,DateStamp4afae 430.


Also, from the above information, the driver that is causing the crash is the TFSysMon.Sys.

The TFSysMon.Sys is a driver for Threatfire.

You could try uninstalling Threatfire and see if the issue resolves.

That seemed to work in the following link:

http://forum.cakewalk.com/tm.aspx?m=1900938&mpage=1

 

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.