Windows 7 x64 Blue Screen - Physical memory Dump

I have gotten the blue screen a few times now. It seems the physical memory dump blue screen starts to show up after the last Window updating. 
Anyone could please help me figure this out?

I attached a link to the dmp files.
https://skydrive.live.com/redir?resid=FF2F42C35A4D3A3D!141&authkey=!AJvPvE7o7Z3rUmI

Windows Error:

Problem signature:
  Problem Event Name: BlueScreen
  OS Version: 6.1.7601.2.1.0.256.48
  Locale ID: 4105

Additional information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA800A734F60
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

Files that help describe the problem:
  C:\Windows\Minidump\041513-11824-01.dmp
  C:\Users\Yonsu_Kim\AppData\Local\Temp\WER-21060-0.sysdata.xml

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt


Thank you.



 

Question Info


Last updated March 15, 2018 Views 744 Applies to:
Answer
Answer
These crashes were caused by memory corruption (probably a driver).  Please run these two tests to verify your memory and find which driver is causing the problem.  


*Dont forget to upload any further DMP files (especially those when verifier is running)

*If you are overclocking anything reset to default before running these tests.
In other words STOP!!!   If you dont know what this means you probably arent

1-Memtest.
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org 
*Boot from the CD, and leave it running for at least 5 or 6 passes.
*Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
*Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.
If a known good stick fails in a motherboard slot it is probably the slot.


2-Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is.

*But sometimes it'll crash and won't tell you the driver.
*Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
*I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise.
*Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Here is the procedure:

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
*Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.
*Reboot the system and wait for it to crash to the Blue Screen.
*Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
*If you can't get into Windows because it crashes too soon, try it in Safe Mode.
*If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

*Further Reading
http://support.microsoft.com/kb/244617

Cat herder
Windows Insider MVP
MVP-Windows and Devices for IT
http://www.zigzag3143.com/

Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.