May 10, 2024
Contribute to the Windows forum!
Click here to learn more 💡
May 10, 2024
Windows 7 Top Forum Contributors:
Bill Smithers - LemP ✅
May 10, 2024
Windows 7 Forum Top Contributors:
Bill Smithers - LemP ✅
lost access codes to connect new device to wireless network
Report abuse
Thank you.
Reported content has been submitted
Attempting to connect new I-Pad to wireless router and cable modem but have lost the access codes
Do you have a Windows 7/Vista/XP wireless computer handy that is connected to your wireless network? You can easily get the network profile onto a flash drive for later use in case you need to recover a wireless client or add a new client.
http://theillustratednetwork.mvps.org/LAN/SoHoWirelessSecurity.html#Windows_Connect_Now
If the client can not use WCN, ie. like a MAC or Linux client for example, the wireless key is in a plain text file in the \Smrtntky\Wsetting.txt file on the flash drive. Since the iPad apparently does not include a USB port simply type the key into the iPad.
On a Windows 7 machine you can also, as an administrator, easily see the key on your wireless PC. Open Network and Sharing Center and click on Manage wireless networks at the left. Select the network, right click and select Properties. Click on the Security tab and check the Show characters checkbox.
http://cid-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/RecoverKey.png
Otherwise many wireless routers allow you to see the encryption key in plain text. Log into the router and go to the wireless security/encryption tab to view the key. If that is not available then redoing the key from scratch is your best bet. There should be no need to reset the router to the factory defaults unless you want to. Simply login to the router and reconfigure the encryption type, ie. WPA2 or WPA, if desired and a new key value. Configure your wireless clients with the new encryption type and key.
MS-MVP Windows Desktop Experience
"When all else fails try what the captain suggested before you started..."
"When all else fails read the instructions"
Report abuse
Thank you.
Reported content has been submitted
1 person found this reply helpful
·Was this reply helpful?
Sorry this didn't help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
If you have the default logon and password for the router, unplug router from modem, onback of router press reset button, this will put it in the origional state, turn off router, turn it back on, connect computer to router by cable, set up router from scratch.
If you do not have or know default logon or password of router, go on line to the brand tech web site to get.
Just a guess, admin/password
Good Luck!
HTH
>WT<
Report abuse
Thank you.
Reported content has been submitted
Was this reply helpful?
Sorry this didn't help.
Great! Thanks for your feedback.
How satisfied are you with this reply?
Thanks for your feedback, it helps us improve the site.
How satisfied are you with this reply?
Thanks for your feedback.
Question Info
Last updated March 9, 2022 Views 888 Applies to: