The Longest Restart Ever

after installing the latest build, my PC prompted me to restart, as usual I follow accordingly. Since 1300 hours until now, almost 8 hours, my screen still showing restart. What should I do, someone please help if you facing the issue. 

Thank you.

|
Hi Jonathan,

Press and hold the Power button for 5 - 10 seconds to perform a hard shut down

Wait a minute or two

Then start your PC again, the update will either have been applied correctly or it will roll back at that point . ..
___________________________________________________________________

Power to the Developer!

MSI GV72 - 17.3", i7-8750H (Hex Core), 32GB DDR4, 4GB GeForce GTX 1050 Ti, 256GB NVMe M2, 2TB HDD

Was this reply helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

    Hi Jonathan!

    So you are troubled as your PC is pinned to restarting screen... Don't worry! I got you             covered! :D

    

    PLEASE CONSIDER FOLLOWING STEPS:-

           

  • Disconnect peripherals and cold restart.
  • Turn off computer, disconnect power cord and restart after a few minutes.

Solution without using a recovery disk:

  1. Restart computer and press F8 several times to enter Safe Boot Menu. If F8 key has no effect, force-restart your computer 5 times.
  2. Select Troubleshoot > Advanced Options > System Restore.
  3. Select a good known restore point and click Restore.

Solution using a recovery disk:

  1. Plug an empty USB flash drive (> 4 GB) into a healthy computer.
  2. Prepare a recovery disk using Microsoft Media Creation Tool [1].
  3. Plug the USB drive into the frozen computer.
  4. You may have to tell the BIOS to boot from USB disk.
  5. Restart computer. Windows Setup will show up from USB drive.
  6. Select your language, keyboard layout and click Next.
  7. Click "Repair Windows" (but not "Install Windows").
  8. Select Troubleshoot > Advanced Options > System Restore.
  9. Select a good known restore point and click Restore                                                                                                                                                                                                            

If this was helpful please click on "YES it solved my problem", it really motivates me towards helping more and more...

Have further question or doubts? Please feel free to ask! Waiting for your reply! :D

     

2 people found this reply helpful

·

Was this reply helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Try resetting your BIOS defaults:

https://www.groovypost.com/howto/reset-pc-bios-...

If that does not work and you have a desktop computer...

Power down
Unplug it
Open the system unit

Remove the CMOS CR-2032 chip
Plug it in, start the machine, wait 10 seconds

Power down, unplug it, reinstall the CMOS CR-2032 chip
Plug it in again, power up

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.
Best regards,
Andre Da Costa
Independent Advisor for Directly

Was this reply helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

 
 

Question Info


Last updated May 19, 2021 Views 390 Applies to: