System Blue Screen Crash Error - DRIVER_IRQL_NOT_LESS_OR_EQUAL

Get bluescreen install then run it. Whats it say?

my computer doesn't stay up long enough to run programs. or check and the BSOD is only up for a sec before it restarts... but ill try to get a picture of it

Does it crash before it gets into windows?? Get this you have to put it on something bootable then boot from it / run it

Hi

You don't run the BlueScreen View when the computer crashes, you run it after the system reboots.

That program will automatically analyze the C:\Windows\Minidump\040411-40890-01.dmp file created by the system crash and determine what is causing the problem.

Regards

Hi,

Check this thread for information using BlueScreenView, MyEventViewer and other methods
to troubleshoot BlueScreens - top 3 replies (+1 other).

http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if you make them available from the SkyDrive or other file
sharing sites.

Zip or upload the contents of C:\Windows\minidump

Use SkyDrive to upload collected files
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

-------------------------------------------------------------------------

Also do this so you can see the likely bluescreens.

Windows Vista automatically restarts if your PC encounters an error that causes it to crash.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-t84.html

===========================================================

Check with these utilities to see if any information can be gathered :

This is an excellent tool for posting Blue Screen Error Information

BlueScreenView - Free - scans all your minidump files created during 'blue screen of death'
crashes, and displays the information about all crashes in one table.
http://www.nirsoft.net/utils/blue_screen_view.html

-------------

MyEventViewer can be checked at the time of the BlueScreen (BSOD) to within a second or
so of the time of the BSOD to provide more information as to possible cause - see TIP.

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.
TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file -
set it to a bit before and after the time of the BSOD.
http://www.nirsoft.net/utils/my_event_viewer.html

------------

AppCrashView - Free - a small utility for Windows Vista and Windows 7 that displays the
details of all application crashes occurred in your system. The crashes information is extracted
from the .wer files created by the Windows Error Reporting (WER) component of the operating
system every time that a crash is occurred. AppCrashView also allows you to easily save the
crashes list to text/csv/html/xml file.
http://www.nirsoft.net/utils/app_crash_view.html

Hope this helps.

Try using windows safe mode to get the c:\windows\minidump files and upload them to your skydrive as posted above.

To get into safe mode, press f8 when computer is loading windows and it will bring a menu up. select safe mode from the menu.

 

---

MyPcHealth ------ Free Tools

driver_irgl_not_less_or_equal

The most important information is the Bug_Check Code - BCCode
or Stop Code. (You have a "g" and not a "q".)

D1 = DRIVER_IRQL_NOT_LESS_OR_EQUAL

Hi,

For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my replies
if this thread - top 3 answers (+1 other).

http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if you make them available from the SkyDrive or other file
sharing sites.

Zip or upload the contents of C:\Windows\minidump

Use SkyDrive to upload collected files and post screen shot/picture.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

==============================================================

BCCode: D1     0x000000D1

Check these KB's

Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or from hibernation: "STOP: 0x000000D1"
http://support.microsoft.com/kb/978982

Stop error on a Windows Server 2008 R2-based or Windows 7-based computer when the operating
system uses a virtual storport miniport driver to save a dump file or a hibernation file: "0x000000D1"
http://support.microsoft.com/kb/2320550

Those and 7 other KB Articles are available
http://support.microsoft.com/search/default.aspx?mode=a&query=0x000000D1&spid=14019&catalog=LCID%3D1033&1033comm=1&res=10

--------------------------------------------------

Think Video drivers mainly though it can be others. See the driver section in my generic bluescreen
troubleshooting methods below. BIOS, low level chipset drivers and antivirus/antispyway/security
programs can also cause this. Check the troubleshooter and when you get to the driver and memory testing sections refer to the generic methods in next message and then return to the troubleshooter
if needed.


Cause

A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high.

This bug check is usually caused by drivers that have used improper addresses.

If the first parameter has the same value as the fourth parameter, and the third parameter indicates an execute operation, this bug check was likely caused by a driver that was trying to execute code when the code itself was paged out. Possible causes for the page fault include the following:

• The function was marked as pageable and was running at an elevated IRQL (which includes obtaining a lock).
• The function call was made to a function in another driver, and that driver was unloaded.
• The function was called by using a function pointer that was an invalid pointer.

BCCode: d1   0x000000d1  <-- read this link
http://www.faultwire.com/solutions-fatal_error/DRIVER-IRQL-NOT-LESS-OR-EQUAL-0x000000D1-*1210.html?order=votes

=========================================

Look in the Event Viewer to see if anything is reported about those.
http://www.computerperformance.co.uk/vista/vista_event_viewer.htm

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.
TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.
http://www.nirsoft.net/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen
info that would help. Such as the BCC and the other 4 entries on the lower left. And any other
error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)
tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000


This is an excellent tool for posting Blue Screen Error Information

BlueScreenView scans all your minidump files created during 'blue screen of death'
crashes, and displays the information about all crashes in one table - Free
http://www.nirsoft.net/utils/blue_screen_view.html


Many BlueScreens are caused by old or corrupted drivers, especially video drivers however
there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or
Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7
http://www.sevenforums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log (and Windows 7)
http://support.microsoft.com/kb/928228

The log might give you the answer if there was a corrupted driver. (Does not tell all the possible
driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7
http://www.sevenforums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party
keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in 7 (updating drivers manually using the methods above is preferred
to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
unexpectedly
http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)
http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages
http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors
http://kb.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7
http://www.sevenforums.com/tutorials/681-startup-repair.html

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html

How to Create a Windows 7 System Repair Disc
http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

Hope this helps.

Hi,

References to Vista also apply to Windows 7.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView - Free - utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
description, version, product name, company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker's which are the most current.
Control Panel - Device Manager - Display Adapter - write down the make and complete model
of your video adapter - double click - Driver's tab - write down the version info. Now click UPdate
Driver (this may not do anything as MS is far behind certifying drivers) - then Right Click -
Uninstall - REBOOT this will refresh the driver stack.

Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party
with their own software and drivers and any other major device drivers you have.

Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and then Device
Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for
BIOS, Chipset and software updates at System Maker's site while there.)

Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN - REBOOT after
each installation.

Always check in Device Manager - Drivers tab to be sure the version you are installing actually
shows up. This is because some drivers rollback before the latest is installed (sound drivers
particularly do this) so install a driver - reboot - check to be sure it is installed and repeat as
needed.

Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER - check
manually by model.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in 7 (updating drivers manually using the methods above is preferred
to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update drivers manually then it is a good idea to disable Driver Installations in Windows
Updates, this leaves Windows Updates ON however it will not install drivers which will usually
be older and cause issues. If Updates suggests a new driver then HIDE it (Right Click on it)
and then go look for new ones manually if you wish.

How To Disable Automatic Driver Installation In Windows Vista - Drivers
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/
http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

==========================================

Memory tests do not catch all errors such as mismatched memory (possible even for sticks
that appear to be identical) and when faster memory is placed in system behind slower memory.
So it is best to also swap sticks in and out to check for those even if all memory tests fail to show
a problem.

To test RAM check here - let it run 4+ hours or so.  <-- best method
www.memtest.org

For the Windows Memory Diagnostic Tool.

Start - type in Search box ->  Memory - find Memory Diagnostics tool at top of list - Right Click -
RUN AS ADMIN follow the instructions

Windows Vista: How to Scan / Test your RAM or Memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/windows-vista-how-to-scan-test-your-ram-or-memory-with-windows-vista-memory-diagnostic-tool/

How to Run the Memory Diagnostics Tool in Windows 7
http://www.sevenforums.com/tutorials/715-memory-diagnostics-tool.html

Test Your Computer’s Memory Using Windows Vista Memory Diagnostic Tool
http://www.howtogeek.com/howto/windows-vista/test-your-computers-memory-using-windows-vista-memory-diagnostic-tool/

Hope this helps.

http://i1184.photobucket.com/albums/z335/klapfel1/bsod.jpg

i cant do anything on the computer as soon as windows home screen loads. before i can click anything it crashes...