Connect Windows 10 PC to Smart TV

Multimedia files can be projected/played on a Smart TV from a Windows 10 PC by the following methods:

1. CAST (Media Streaming): Media is streamed in compressed file format from a source device to the media player on a receiver device which decompresses the file stream to play the media in real time.

2. PROJECT (Screen Mirroring): The image displayed on the screen of a device is replicated on the display screen of another device in real time. In essence, the video-out port of the sender device is connected to the video-in port of the receiver device. The bandwidth required for Screen Project is much higher than Cast, because the pixel data stream between the source and receiver is raw video in decompressed format.

3. DLNA (Media Sharing): A Media File is streamed from a media storage Server on request from a media player Client which decompresses the file stream to play the media in real time. Cast is a variation of DLNA where the sender (server) initiates media streaming to a ready-to-connect receiver (client) listening on a common Wired / Wireless network.

1. CAST: Cast is the easiest method to play a multimedia from a PC on to a Smart TV called Smart as they have an Operating System. However file formats supported for casting are limited to MP4, WMV, AVI, MOV for video and MP3, WMA, WAV for audio. The audio system of the TV can either be built-in or externally connected to a Hi-fi system.

The Cast setup requires that (i) the PC and the Smart TV are connected to the same Home WiFi network (ii) Network discovery And File sharing are enabled on your currently active network profile (Private / Public) through Control Panel > Networking and Sharing Centre > Change advanced sharing settings (on left panel).

Just as networking needs to be configured on the PC, similarly networking has to be configured on the Smart TV through the Settings menu, to either establish a peer-to-peer direct communication path Or inter-connect by hooking up to a common access point. As with any operating system, a network once created on a Smart TV, persists as the default network until a new network is created.

To play a video, Open File Explorer on the PC, right click on the video file and from the shortcut menu choose Cast to Device > Smart TV (name). It may take some time for the PC to search for the TV on the network before displaying its name on the shortcut menu.

Select the TV name on the shortcut menu and the media will automatically start playing on the TV, with the Cast Window for media control appearing on the PC. You can use the PC for other work by minimising the Cast Window while the media continue to play on the TV.

Once a TV is successfully linked to a PC, the TV-name gets registered in the Devices list under Windows Settings and the TV-name will be readily available thereafter in the Cast to Device menu.

On Windows 10, Casting is the simplest and most reliable choice for playing multimedia files from PC to any TV.

2. PROJECT:  Project or Screen Mirroring allows a Windows 10 PC to project its Screen to a Smart TV by using the Miracast technology. Unlike Cast, Screen Mirroring allows any type of file that displays on the PC screen to be projected on to the TV, be it a text document or a movie played from the DVD drive.

Miracast is a standard introduced in 2012 by "Wi-Fi Alliance" – a non-profit organisation, for wireless screen mirroring of devices with an operating system like PC and Mobile, on to Displays such as TV, LED panels and Screen Projectors.

Microsoft is one of the main promoters of Miracast in their Windows OS, while Google dropped Miracast support in their Android OS starting Android 6 Marshmallow, in favour of Google's own proprietary Chromecast technology. Miracast in android devices is now possible through miracast apps in Google Play Store. Some mobile device manufacturers with customised android provide Miracast built into their OS.

At the core of Miracast standard is the WiFi Direct technology originally developed by Intel but subsequently discontinued, on adoption by the Miracast organisation. Much like bluetooth, WiFi Direct devices creates its own hotspot to network with other WiFi enabled devices without the need of a Wireless Access Point. WiFi Direct must be built into the hardware of one of the communicating devices. In contrast, Chromecast works on a WiFi network hosted by the Router.

Miracast serves to establish a peer-to-peer WiFi Direct connection between a OS device and a Display device, and allows streaming of up to 1080p HD video and 5.1 surround sound.

The objective of Miracast is to separate the streaming network from the Home WiFi network used to access the internet. A PC on a home network use the WiFi direct path to stream data to a TV receiver, without having to consume the bandwidth of the home network used by other devices for inter-communication and accessing the internet. The PC can simultaneously stream data and access internet, but that could strain the WiFi port on the PC unless it has two separate WiFi ports – one configured for Miracast and the other for internet access.

Windows 10 implementation of Miracast requires that (i) the PC take ownership of the media streaming part of Miracast to effect pixel data streaming of the PC screen, and (ii) the Display Device (TV) take ownership of the WiFi Direct networking part of Miracast to establish a direct communication path with the PC, by incorporating the WiFi-Direct hardware technology which we shall henceforth refer to as a Miracast adapter.

In Windows 10, the Miracast feature is part of Windows installation depending upon the capability of the hardware. In other words, it is upto the PC manufacturer to provide the necessary hardware to ensure that the media streaming part of Miracast is in place. The hardware elements that engines the Miracast feature in a PC are the Processor, Graphics driver and the WiFi adapter driver which should correspond to the Windows 10 Network Driver Interface Specification (NDIS) version number.

Miracast is natively available on a TV when the Miracast adapter is integrated into the TV electronics. Even if a TV has Miracast built-in, it might not support the Windows 10 Wireless display protocol. Miracast can also go entirely missing on an android TV.

Whatever may be the case, a TV can be made to support Windows Wireless Display by attaching a Miracast dongle, which among others is also offered by Microsoft specifically for Windows PC projection. The dongle called Microsoft Wireless Display Adapter has to be connected to the HDMI port of the TV with the USB end of the adapter connected to an USB port - preferably the one on the TV set, to draw power.

To project a PC screen to a TV, the following steps are necessary:

(i) Enable WiFi on the PC and the TV. They can be on the same / different network.

(ii) First determine if the PC is Miracast compliant. Press Windows Key + P on the PC keyboard to open the Project action bar (Charms Menu) which must contain the link "Connect to a wireless display" at the bottom. Miracast is not available on the PC if the link is not seen on the action bar.

(iii) Ensure that the TV has a built-in Miracast adapter Or a Microsoft Wireless Display Adapter is attached to the TV.

(iv) Mirroring is enabled on the Smart TV.

(v) Set the Signal source for the TV with a built-in Miracast adapter to the Mirroring port; Or set the signal source to the HDMI port where the Microsoft Wireless Display adapter is attached.

(vi) Press Windows Key + P on the PC keyboard to invoke the Project action bar / Charms menu and select the "Connect to a wireless display" link at the bottom. The action bar will now broadcast the Microsoft adapter name Or the TV-name if it has a built-in Miracast adapter Or both including all nearby devices which are ready to connect via Miracast. Select the one applicable to start mirroring the PC screen on to the TV. If the TV-name or the Microsoft adapter name is not found on the Project action bar, ensure that you add the TV-name / adapter within Devices of Windows Settings.

If Miracast is not available / not possible on a PC, then the fail-safe alternative is to go for the legacy wired connection by a HDMI cable between the HDMI port of PC and the HDMI port of TV, provided the TV and the PC are in close proximity. Set the Signal source for the TV to the HDMI port where the cable is attached. Press Windows Key + P on the PC keyboard to invoke the Project action bar / Charms menu and choose the Duplicate option to simultaneously display the PC screen on to the TV.

Since Miracast evolved as an WiFi extension to HDMI, it is sometimes referred by the mnemonic "HDMI over WiFi".

A TV with Miracast will contain a Setting within the Networks section, which will show the SSID and Password of the WiFi Direct Access point. This access point on being enabled will show up as a hotspot on the "WiFi available networks list" of a PC. A PC can use the WiFi Direct hotspot for Cast and DLNA without the need of a Home network. However, Miracast will not be possible when using the WiFi Direct hotspot as a WiFi access point.

Caution ! A Smart TV can broadcast two names: The system defined Miracast SSID for Screen Project and the user defined name when using the Home network for Cast and DLNA.

3. DLNA: DLNA (Digital Living Networking Alliance) is the older standard for interoperability of digital multimedia devices. All participating devices must be DLNA certified to establish a network connection. Windows 10 is DLNA certified and you have to ensure that DLNA is available on the Smart TV.

The DLNA network between a PC (Digital Media Server) and a Smart TV (Digital Media Receiver) can be set up through a wired Ethernet connection or a wireless WiFi connection. The DLNA framework for communication is constituted by the Windows 10 Library Folders of the user which is configured by design to be the Digital Media Server (DMS) for sourcing and streaming the media files to a receiver TV via a wired or wireless network.

The TV performs the Digital Media Receiver (DMR) client functions by acting as a Digital Media Controller (DMC) for being able to access the media files on the DMS (PC) and instruct the PC to stream the media file, AND as a Digital Media Player (DMP) having a decoder unit capable of decompressing the streamed media for playing, AND also as a Digital Media Renderer to display the decoded stream on its screen.

DLNA services has to be explicitly enabled on a Windows 10 PC by opening the Control Panel > Networking and Sharing Centre > Media streaming options (on the left panel) > Turn on media streaming (button).

On the media steaming options window (screenshot above), enter a name for the user's library folders on the PC and allow access to the TV-name appearing under the devices list on the Local network.

If the TV-name does not appear, first ensure that both the TV and PC are connected to the same local network. Then use the Cast to Device menu on any MP4 file to register the TV-name within the Devices list of Windows Settings and also to show up on the Media streaming options window.

Once enabled, DLNA services will automatically start everytime the PC is powered ON. To disable DLNA you need to open the Services applet by calling Run dialog (WinKey+R) and then entering services.msc in the dialog > scroll down on the Services applet and double click on "Windows Media Player Network Sharing Service" to open its Properties window > Stop the Service by clicking on the Stop button > change the Startup type to "Manual" from the drop-down > click OK and close the Services applet.

The DLNA network can be implemented in one of the following ways:
(i) Wired: A direct connection by an Ethernet Cross-Cable between the LAN (RJ-45) port of PC and the LAN (RJ-45) port of TV.
(ii) Wired: The PC and the TV connects to a Router / Switch by a normal Ethernet cable.
(iii) Wireless: The PC and the TV connects to a Router through WiFi.
(iv) Wireless: The PC connects to the WiFi Direct Hotspot of the TV.

The direct Ethernet cross-cable connection is the most reliable and simplest method. The WiFi connection although simple can cause stuttering and latency issues during HD video streaming.

Once the PC and TV establish a network path for mutual communication, the TV will automatically identify the PC as a DLNA server. If everything goes right, the PC-name will appear on the Device / Port / Server list of the TV, generally accessible from its Home Screen.

Finally, the PC has to be chosen as the signal source for the TV from the input port list Or the connected device / server list of the TV. The Windows 10 Library folders will display on the TV screen from which a media file can be selected for playing on the TV.

The Digital Media Player (DMP) module within the TV must provide native support to the media file format for playing on the TV, and this DMP which is built specific to every TV model defines all the types of media it can support. The easiest way to ascertain the capability of DMP within a TV, is to experiment playing different multimedia file types from a Pen Drive directly attached to an USB port of the TV.

DLNA scores over CAST when it comes to browsing and choosing to play files from the Media Library on the PC, right from your TV seat with the aid of TV Remote acting as a DMC - without having to move around and reach the PC to initiate media streaming individually for each file.

Windows Media Player (WMP) which was the original DLNA Server for Media Library and Media Streaming, now supports Cast. Right click on any media file on the WMP Library and you get the Cast to device function in the shortcut menu. WMP has a Playlist feature but the streaming controls remain in the Player itself - not accessible from a TV. Films and TV app is the new age media player in Windows 10 and is the one in the advancement path, although WMP remains a more popular and preferred DLNA networking device.

On the reverse direction, when the TV is enabled as a DLNA Server through the TV Network settings, it allows media files in storage devices attached to the TV to be accessible from the WMP of a networked PC.


Sushovon Sinha

* Please try a lower page number.

* Please enter only numbers.

* Please try a lower page number.

* Please enter only numbers.

I am able to connect my surface pro 4 to my Samsung led 55 tv. Problem is,my surface screen goes black when I project to my TV ,making it difficult to navigate my pc.
Make sure that you do not choose the option "Second screen only" in the Project action bar activated by pressing the WinKey+P on the keyboard.
Yes,thats exactly what fixed my problem. Works now. Thank you


My Sharp Smart tv used to see my pc as a n media server, it now doesn't. If I sect Media server on the tv it says media server "not found".

I have checked that media streaming is turn on and it is.

If I cast photos to the tv they are displayed will a banner at the bottom showing "pause" etc. however casting only shows photos in landscape mode, if the photo was taken in portrait mode the tv displays it side ways.

I'm running Win10 Home Build 1809, 64 bit.

After the 1803 upgrade, I managed to get everything working again, but now it's worse than ever.

Do I now need to install a Media Server  program to do the job the pc once did?



From what you say, I believe that your PC is able to communicate with TV but not the other way round.

This could be because of the WiFi driver of your WiFi adapter in PC (Internal/USB) is not DLNA compliant.

Microsoft is updating the NDIS driver version with every new version of Windows.

Check the following link to see the latest version of NDIS applicable for Windows 10:

The NDIS version of you WiFi adapter should be at-least version 6.7 for DLNA operation. Anything less will not work. Even then, video streaming from PC is likely to stutter.

You can check the NDIS version of your WiFi adapter by typing Get-NetAdapter | Select Name, NdisVersion at the Windows Power Shell prompt of your PC. Simply copy the command from here and right click at the Power Shell prompt to enter the command.

Try updating the WiFi driver of your adapter to NDIS version 6.7 or above, if available from the manufacturer.

You are out of luck if this adapter is out of support. Try experimenting with a new USB WiFi adapter and see if it works before you decide to buy one.

Sushovon Sinha.


My Home Network consists of a BT Broadband Hub to give internet access.

The hub is connected to a switch which connects to my Desktop Pc running Win 10 Home Build 1809.

The desktop holds all my media files, Videos, Music  & photos.

Also connected to the switch are my Sharp Smart TV, BT Youview Box, Freesat Satellite box.

Before the October Update, I could select Media Server on my Tv and it would show the desktop and I could stream all my media files.

Now it just shows "No server found".

I have made sure that media streaming is turned on, but still no joy.

Are we now saying that my network adapter is not DLNA compliant?

I have tried installing Universal Media Server software, but that is very hit and miss when it comes to starting up.

When it does start the tv sees it and can play media files.

Am I missing something in my PC setup, to allow the PC to act as a media server?

Since Cast is possible from PC to TV, there is possibly no problem with the network. You have Media Streaming enabled on the PC for DLNA.

Check the version of NDIS on your WiFi adapter. I have also added a new method for interconnection today; please refer to the penultimate paragraph under section 2. PROJECT. Even this method will require your PC WiFi adapter to be NDIS >= 6.7.

Sushovon Sinha


My pc doesn't have a WiFi adapter as I use an ethernet cable to connect to my home network.

The tv is also cable connected, I have tried Emby as a server the tv connects, but all my jpeg's are seen as "Unsupported File".

It seems to me every time there's an update I lose functionality, first there was Homegroup and now Media Server, what next?


I was using Screen Mirroring with Windows 10 PC to project to a Sharp Roku TV apparently using Miracast. It worked fine until a Windows 10 update auto installed (I'm at windows 10 version 1803 (kB4462933)); In my efforts to resolve this all drivers have been undated. While the smart TV name displays, after a minute i get "couldn't  connect".   Is this an open issues?

* Please try a lower page number.

* Please enter only numbers.

* Please try a lower page number.

* Please enter only numbers.


Discussion Info

Last updated November 28, 2020 Views 99,851 Applies to: