Question

Q: BSOD cause of a bug check 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 0x0000000000000000)

Hi I've been having BSOD somewhere between every 7-8 hours with the following message I get at the event viewer :

first 2 errors : 
- Unable to produce a minidump file from the full dump file.
- The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000d1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .

and then Critical :
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

I've checked the system Ram with memtest86 no problem was showing and again I tested the whole pc with programs such as Aida64 extreme edition and checked my vga via 3d mark 11 ! none showed any problems 

my system is :

CPU : Intel Core i7 3770k 3.5
Ram : 32 Gig Giel 1600
MB : Asus P8Z-77V
VGA : ATI 6750 1Gig GDDR 5
HD : 2x 1TB Western
Power : 750 w

ps : If its necessary to attach MEMORY.DMP file I will but its near 1Gig so hard to upload !


Hi,

You need to set for Minidumps so the files are not so large :

Please double check your settings here :

Control Panel - System - on left side Advanced System Settings - Advanced tab -

Startup and Recovery - Settings - System Failure - check the box to Write an Event to System Log

uncheck Auto Restart 

make sure the Write Debugging is set to small minidump

and the default folder should look like %SystemRoot%\Minidump.

How to configure Windows to create MiniDump files on BSOD
http://blog.nirsoft.net/2010/07/27/how-to-configure-windows-to-create-minidump-files-on-bsod/

===========================================================

Resolving stop (blue screen) errors in Windows 7 - has a section for if you can or can't start Windows.
http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7 

For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my replies
in this thread - top 3 answers (+1 other).

http://answers.microsoft.com/en-us/windows/forum/windows_7-system/sometimes-i-get-a-blue-screen-when-using-ie-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if you make them available from the SkyDrive or other file
sharing sites (such as MediaFire). If you have problems uploading the minidumps copy
them to the Desktop or the Documents folder and upload them from there.

Zip or upload the contents of C:\Windows\minidump

Use SkyDrive to upload collected files.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 

==============================================================


BCCode: D1     0x000000D1

Check these KB's


Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or from hibernation: "STOP: 0x000000D1"
http://support.microsoft.com/kb/978982


Stop error on a Windows Server 2008 R2-based or Windows 7-based computer when the operating
system uses a virtual storport miniport driver to save a dump file or a hibernation file: "0x000000D1"
http://support.microsoft.com/kb/2320550

Those and 7 other KB Articles are available
http://support.microsoft.com/search/default.aspx?mode=a&query=0x000000D1&spid=14019&catalog=LCID%3D1033&1033comm=1&res=10

--------------------------------------------------


Think Video drivers mainly though it can be others. See the driver section in my generic
bluescreen troubleshooting methods below. BIOS, low level chipset drivers and
antivirus/antispyway/security programs can also cause this. Check the troubleshooter and
when you get to the driver and memory testing sections refer to the generic methods in next
message and then return to the troubleshooter if needed.

---------------------------------------------------------------------------------------------------------

BCCode: D1     0x000000D1

Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug check has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.

Important Info If You Have Received a STOP Code


If you received a blue screen error, or stop code, the computer has shut down abruptly to protect itself from data loss. A hardware device, its driver, or related software might have caused this error. If your copy of Windows came with your computer, call the manufacturer of your computer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact info for Microsoft or your computer manufacturer, Contact Support.


If you have experience with computers and want to try to recover from this error, follow the steps provided in the Microsoft article Resolving STOP (Blue Screen) Errors in Windows.

These actions might prevent an error like this from happening again:

  1. Download and install updates and device drivers for your computer from Windows Update.
  2. Scan your computer for computer viruses.
  3. Check your hard disk for errors.

DRIVER_IRQL_NOT_LESS_OR_EQUAL Parameters


The following parameters are displayed on the blue screen.

Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL <-- read link to see parameters
http://msdn.microsoft.com/en-us/library/ff560244(v=VS.85).aspx 

Cause


A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high.


This bug check is usually caused by drivers that have used improper addresses.


If the first parameter has the same value as the fourth parameter, and the third parameter indicates an execute operation, this bug check was likely caused by a driver that was trying to execute code when the code itself was paged out. Possible causes for the page fault include the following:

  • The function was marked as pageable and was running at an elevated IRQL (which includes obtaining a lock).

  • The function call was made to a function in another driver, and that driver was unloaded.

  • The function was called by using a function pointer that was an invalid pointer.

Resolution


To begin debugging, use a kernel debugger to get a stack trace.

If the problem is caused by the driver that you are developing, make sure that the function that was executing at the time of the bug check is not marked as pageable or does not call any other inline functions that could be paged out.

BCCode: d1   0x000000d1  <-- read this link
http://www.faultwire.com/solutions-fatal_error/DRIVER-IRQL-NOT-LESS-OR-EQUAL-0x000000D1-*1210.html?order=votes


==========================================


Look in the Event Viewer to see if anything is reported about those.
http://www.computerperformance.co.uk/vista/vista_event_viewer.htm

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.
TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.

http://www.nirsoft.net/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen
info that would help. Such as the BCC and the other 4 entries on the lower left. And any other
error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)
tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000


This is an excellent tool for posting Blue Screen Error Information

BlueScreenView scans all your minidump files created during 'blue screen of death'
crashes, and displays the information about all crashes in one table - Free

http://www.nirsoft.net/utils/blue_screen_view.html


Many BlueScreens are caused by old or corrupted drivers, especially video drivers however
there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or
Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7
http://www.sevenforums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log (and Windows 7)
http://support.microsoft.com/kb/928228


The log might give you the answer if there was a corrupted driver. (Does not tell all the possible
driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7
http://www.sevenforums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party
keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm


Installing and updating drivers in 7 (updating drivers manually using the methods above is preferred
to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html


Stop Windows 7 from Automatically Installing Device Drivers
http://helpdeskgeek.com/windows-7/stop-windows-7-from-automatically-installing-device-drivers/


Disable Windows Update Device Driver Search Prompt In Windows 7 / Vista (for Professional, Ultimate, and Enterprise)
http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
unexpectedly
http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)
http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages
http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors
http://kb.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7
http://www.sevenforums.com/tutorials/681-startup-repair.html 

How to Boot to the System Recovery Options in Windows 7
http://www.sevenforums.com/tutorials/668-system-recovery-options.html 

How to Create a Windows 7 System Repair Disc
http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

Hope this helps.


Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle <- Mark Twain said it right!

Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

Did this solve your problem?

Sorry this didn't help.


            Hi,

References to Vista also apply to Windows 7.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView - Free - utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
description, version, product name, company that created the driver, and more.
http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker's which are the most current.
Control Panel - Device Manager - Display Adapter - write down the make and complete model
of your video adapter - double click - Driver's tab - write down the version info. Now click UPdate
Driver (this may not do anything as MS is far behind certifying drivers) - then Right Click -
Uninstall - REBOOT this will refresh the driver stack.

Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party
with their own software and drivers and any other major device drivers you have.

Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and then Device
Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for
BIOS, Chipset and software updates at System Maker's site while there.)

Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN - REBOOT after
each installation.

Always check in Device Manager - Drivers tab to be sure the version you are installing actually
shows up. This is because some drivers rollback before the latest is installed (sound drivers
particularly do this) so install a driver - reboot - check to be sure it is installed and repeat as
needed.

Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER - check
manually by model.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.
http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm


Installing and updating drivers in 7 (updating drivers manually using the methods above is preferred
to ensure the latest drivers from System maker and Device makers are found)
http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update drivers manually then it is a good idea to disable Driver Installations in Windows
Updates, this leaves Windows Updates ON however it will not install drivers which will usually
be older and cause issues. If Updates suggests a new driver then HIDE it (Right Click on it)
and then go look for new ones manually if you wish.

Stop Windows 7 from Automatically Installing Device Drivers
http://helpdeskgeek.com/windows-7/stop-windows-7-from-automatically-installing-device-drivers/


How To Disable Automatic Driver Installation In Windows 7 / Vista
http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/

Disable Windows Update Device Driver Search Prompt In Windows 7 / Vista (for Professional,
Ultimate, and Enterprise)
http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/

==========================================

Memory tests do not catch all errors such as mismatched memory (possible even for sticks
that appear to be identical) and when faster memory is placed in system behind slower memory.
So it is best to also swap sticks in and out to check for those even if all memory tests fail to show
a problem.

To test RAM check here - let it run 4+ hours or so.  <-- best method
www.memtest.org

For the Windows Memory Diagnostic Tool.

Start - type in Search box ->  Memory - find Memory Diagnostics tool at top of list - Right Click -
RUN AS ADMIN follow the instructions

Windows Vista: How to Scan / Test your RAM or Memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/windows-vista-how-to-scan-test-your-ram-or-memory-with-windows-vista-memory-diagnostic-tool/

How to Run the Memory Diagnostics Tool in Windows 7
http://www.sevenforums.com/tutorials/715-memory-diagnostics-tool.html

Hope this helps.


Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle <- Mark Twain said it right!

Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

Did this solve your problem?

Sorry this didn't help.


Boa tarde amigos meu computador esta dano tela azul já busquei informações sobre o código mais barato e código de estado

O mais difícil para uma tela azul quando usado Torrent para abaixa meus aquivos

Não da tela azul já desinstalei e reinstalei e mesmo assim da tela azul

Se alguém súber com revolver por favor manda um e-mail para: *** Email address is removed for privacy ***

Did this solve your problem?

Sorry this didn't help.


 
Question Info

Views: 47,399 Last updated: May 20, 2018 Applies to: