Blue Screen error on Windows 7 32 Bit Ultimate !

I have 4 GB DDR2 Ram
Nvidia Geforce 9500 GT
Intel Pentium Dual Core E5400
Windows 7 32 bit Ultimate (Build 7600)

and here is the Dump file...

Please resolve it mates...Its been happening every 2-3 mins.

Thanks in Advance

Question Info

Last updated March 25, 2018 Views 3,846 Applies to:


Results verified by WinDBG. DumpCHK, and BlueScreenView.

The Bug_Check were 8E CAUSE  memory_corruption and ntkrpamp.exe which is a Windows
component which means something else drove it into Fault.

BugCheck 1000008E, {c0000005, 82ac0089, 94ea7aa0, 0}
Probably caused by : ntkrpamp.exe ( nt!IopCloseFile+20b )
IMAGE_NAME:  ntkrpamp.exe
FAILURE_BUCKET_ID:  0x8E_nt!IopCloseFile+20b
BUCKET_ID:  0x8E_nt!IopCloseFile+20b

BugCheck 1000008E, {c000001d, 82c78b14, 9f5602cc, 0}
Probably caused by : memory_corruption
MODULE_NAME: memory_corruption
IMAGE_NAME:  memory_corruption
FOLLOWUP_NAME:  memory_corruption
Followup: memory_corruption

1. Check with STRIDE support and their forums (if any). Thouroughly check the
memory. Keep in mind that memory tests do not detect all errors such as the
tiny speed differences between the memory modules that appear to be identical.
So it may be necessary to swap the modules in and out in different combinations
and patterns (see memory test methods in the next message). 

2. Check with ASUStek Support, their on-line documentation and drivers, and ask
in their forums about any known issues. Update the BIOS, low level chipset drivers,
and the major on-board and separate device drivers. Run DriverView - set VIEW
to Hide Microsoft drivers - update those without Dump in their names (see driver
update methods in the next message).

BiosVersion = 0502  
BiosReleaseDate = 03/03/2010 <- check for updates to the BIOS, low level chipset
drivers, and the major on-board and separate device drivers.
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = P5KPL-AM/PS
BaseBoardVersion = x.0x

ASUStek Support

ASUStek Forums

ASUStek Drivers

3. Remove ALL power then reseat the cards, memory, and cables (on both ends
when possible) - actually remove and replace - do not just snug. Clean out the
dust bunnies and ensure the vents are clean and that the fans are working. Try
adding a small fan blowing into the intake to reduce the effects of heat.

4. Use the other method in the troubleshooters below.


Resolving stop (blue screen) errors in Windows 7 - has a section for if you can or can't start Windows. 

Check this thread for information using BlueScreenView, MyEventViewer and other methods
to troubleshoot BlueScreens - top 3 replies (+1 other). 


BCCode: 8E  0x0000008E is same as 0x1000008E

Two primary causes of these blue screen are video drivers and BIOS - Check with System Maker's
Site for Display Adapter (Video) and BIOS and then Device Maker's site for latest Video. It can be
other drivers so check while there. Turn OFF auto-driver installation as those are older and if
Windows Updates suggests a driver just HIDE it. Antivirus is another possibility.

See Generic Driver Update Methods and check running Driver Verifier in the next

BCCode: 8E  0x0000008E is same as 0x1000008E


The KERNEL_MODE_EXCEPTION_NOT_HANDLED bug check is a very common bug check. To interpret it, you must identify which exception was generated.

Common exception codes include the following:

  • 0x80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0x80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERT was encountered when no kernel debugger was attached to the system.

  • 0xC0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation occurred.

Resolving the Problem

If you are not equipped to debug this problem, you should use some basic troubleshooting techniques:

Make sure you have enough disk space.

  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video adapters.
  • Check with your hardware vendor for any BIOS updates.
  • Disable BIOS memory options such as caching or shadowing.

If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.

If you do not know the specific cause of the exception, consider the following items:

  • Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
  • Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.

If the bug check message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the system by using the Recovery Console and then deleting the offending system service file.

Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x1E. You can disable memory caching of the BIOS to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.

The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and.chkfiles that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation.

You can resolve BIOS problems by upgrading the system BIOS version

BCCode: 8E  0x0000008E is same as 0x1000008E  <-- read this link*1151.html?order=date


Look in the Event Viewer to see if anything is reported about those.

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.
TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.


Also do this so you can see the likely bluescreens.

Windows Vista automatically restarts if your PC encounters an error that causes it to crash.


Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen
info that would help. Such as the BCC and the other 4 entries on the lower left. And any other
error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)
tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000

This is an excellent tool for posting Blue Screen Error Information

BlueScreenView scans all your minidump files created during 'blue screen of death'
crashes, and displays the information about all crashes in one table - Free

Many BlueScreens are caused by old or corrupted drivers, especially video drivers however
there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or
Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7


Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log (and Windows 7)

The log might give you the answer if there was a corrupted driver. (Does not tell all the possible
driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7


Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party
keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.

Installing and updating drivers in 7

Stop Windows 7 from Automatically Installing Device Drivers

How To Disable Automatic Driver Installation In Windows 7 / Vista

Disable Windows Update Device Driver Search Prompt In Windows 7 / Vista (for Professional,
Ultimate, and Enterprise)


How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)

Understanding and Decoding BSOD (blue screen of death) Messages

Windows - Troubleshooting Blue Screen Errors


In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7

How to Boot to the System Recovery Options in Windows 7

How to Create a Windows 7 System Repair Disc

How to Do a Repair Install to Fix Windows 7

Hope this helps.

Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle <- Mark Twain said it right!

Rob Brown - Microsoft MVP - Windows and Devices for IT 2010 - current
Windows Insider MVP 2016 - current

1 person was helped by this reply


Did this solve your problem?

Sorry this didn't help.

Great! Thanks for marking this as the answer.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this response?

Thanks for your feedback.