Applies to:
wilfonline
Had this question 8
Question
wilfonline asked on
| 19081 views

Error code 1935 while installing Microsoft Visual C++ 2008 SP1

Original title: Error code 1935 installing Microsoft Visual C++ 2008 SP1(x64 in windows 7 Ultimate

I am running Windows 7 Ultimate 64 Bit orginal from MS.  Since I have installed this I receive each time when I try to install Visual C++ 2008 SP1 (x64 following error message:  Error 1935. Error durante la instalación del ensamblado: Microsoft.VC90.MFCLOC, version="9.0.30729.1", publicKeyToken= "1fc8b3b9a1e18e3b", processorArchitecture= "amd64", type= "win32". The Problem I have now that all the new Software using Visual C++ 2008 SP1(x64, eg: all Autodesk 2011 software like Autocad Architecture 2011, Maya 2011, Revit 2011 I cannot install. It would be great if someboddy could help me to solve this problem because I need to use the above Software urgently within my job. Thanks
Linney
Found this helpful 0
Answer
Linney replied on
MVP

Reply

This is an old XP article but it might be suggesting that there is an access permissions type of problem?

You receive an "error 1603: A fatal error occurred during installation" error message when you try to install a Windows Installer package
http://support.microsoft.com/?scid=kb%3Ben-us%3B834484&x=11&y=7#appliesto

Can you start the install by right-clicking on any .exe and selecting the "Run As Administrator" option?  What is the file extension of the install file?  .msi or .msu will need a different approach.

Use the Vista instructions in this to reset to default the security settings.

How do I restore security settings to the default settings?
http://support.microsoft.com/kb/313222/#appliesto


Solving setup errors by using the SubInACL tool to repair file and registry permissions
http://blogs.msdn.com/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx

Gokul T
Found this helpful 0
Gokul T replied on
Microsoft

Hi wilfonline,

Access the link below and follow the steps mentioned by YiChun Chen MSFT, Moderator on Friday, February 26, 2010 9:23 AM to fix the issue:

 

http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/650938d1-d5c5-461e-9170-1d01d15c9dd3


Gokul - Microsoft Support

[If this post was helpful, please click the "Vote as Helpful" (green triangle) button. If it helps in resolving your issue, click "Propose As Answer" or "Mark as Answer" button. By proposing/marking a post as Answered, or Helpful you help others find the answer faster.]
Linney
Found this helpful 0
Linney replied on
MVP

Reply

This seems to indicate that your problem may be tied up with  Microsoft .NET Framework, which seems to be the path you are following.

Error message when you try to install a 2007 Office program: "Error 1935. An error occurred during the installation of assembly component"
http://support.microsoft.com/kb/926804

Net Framework is listed in the "Turn Windows features on or off", section of Programs and Features.  See if you can uninstall it and reinstall it by using the check box there.

You might find some more clues here?

http://www.google.com/search?q=I+cant+reinstall+office+or+most+other+software+I+get+an+error+usually+1935&rls=com.microsoft:en-au&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1

How to repair the .NET Framework 2.0 and 3.0 on Windows Vista
http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

 

Problem Installing Autodesk Inventor 2009
http://discussion.autodesk.com/forums/thread.jspa?threadID=695681

Autocas Discussion Groups
http://discussion.autodesk.com/forums/index.jspa;jsessionid=HdZJJHWNsn64324ShNGJD33pYnZmG8xhTNn21l60wpQJgNGgn74P!-1076183167

wilfonline
Found this helpful 0
wilfonline replied on

Reply

Unfortunately it didn't resolve my problem. below yoou can see the log i received after i have tried the steps mentioned byYiChun Chen MSFT.

2010/8/18:08:28:04 wilfried WILFRIED === Setup started on WILFRIED by wilfried ===
2010/8/18:08:28:35 wilfried WILFRIED === Setup ended ===

2010/8/18:08:28:23 wilfried WILFRIED === Setup started on WILFRIED by wilfried ===
2010/8/18:08:33:32 wilfried WILFRIED Install Autodesk Design Review 2011 Succeeded 
2010/8/18:08:33:38 wilfried WILFRIED Install Microsoft Visual C++ 2008 Redistributable (x64) Failed Installation aborted, Result=1603
2010/8/18:08:33:55 wilfried WILFRIED Rollback Autodesk Design Review 2011 Succeeded 
2010/8/18:08:45:42 wilfried WILFRIED Install Microsoft Visual C++ 2008 Redistributable (x64) Failed Installation aborted, Result=1603
2010/8/18:08:56:13 wilfried WILFRIED Install Microsoft Visual C++ 2005 Redistributable (x86) Succeeded 
2010/8/18:08:56:17 wilfried WILFRIED Install Microsoft Visual C++ 2008 Redistributable (x86) Succeeded 
2010/8/18:08:57:03 wilfried WILFRIED Install Autodesk Design Review 2011 Succeeded 
2010/8/18:08:57:12 wilfried WILFRIED Install Microsoft Visual C++ 2008 Redistributable (x64) Failed Installation aborted, Result=1603
2010/8/18:08:57:25 wilfried WILFRIED Rollback Autodesk Design Review 2011 Succeeded 
2010/8/18:08:57:25 wilfried WILFRIED Rollback Microsoft Visual C++ 2008 Redistributable (x86) Failed Installation aborted, Result=1619
2010/8/18:08:57:25 wilfried WILFRIED Rollback Microsoft Visual C++ 2005 Redistributable (x86) Failed Installation aborted, Result=1619
2010/8/18:09:29:58 wilfried WILFRIED === Setup ended ===

2010/8/19:07:33:13 wilfried WILFRIED === Setup started on WILFRIED by wilfried ===
2010/8/19:07:33:43 wilfried WILFRIED === Setup ended ===

2010/8/19:07:33:37 wilfried WILFRIED === Setup started on WILFRIED by wilfried ===
2010/8/19:07:38:54 wilfried WILFRIED Install Autodesk Design Review 2011 Succeeded 
2010/8/19:07:39:00 wilfried WILFRIED Install Microsoft Visual C++ 2008 Redistributable (x64) Failed Installation aborted, Result=1603
2010/8/19:07:39:17 wilfried WILFRIED Rollback Autodesk Design Review 2011 Succeeded 
2010/8/19:07:39:35 wilfried WILFRIED === Setup ended ===

 

Linney
Found this helpful 0
Answer
Linney replied on
MVP

Reply

This is an old XP article but it might be suggesting that there is an access permissions type of problem?

You receive an "error 1603: A fatal error occurred during installation" error message when you try to install a Windows Installer package
http://support.microsoft.com/?scid=kb%3Ben-us%3B834484&x=11&y=7#appliesto

Can you start the install by right-clicking on any .exe and selecting the "Run As Administrator" option?  What is the file extension of the install file?  .msi or .msu will need a different approach.

Use the Vista instructions in this to reset to default the security settings.

How do I restore security settings to the default settings?
http://support.microsoft.com/kb/313222/#appliesto


Solving setup errors by using the SubInACL tool to repair file and registry permissions
http://blogs.msdn.com/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx

wilfonline
Found this helpful 0
wilfonline replied on

Reply

hi linney, i have tried the steps you mentioned to me. still the same problem. by the way i find out, that i have deleted the trustedinstaller, that probably could be the problem. is there any way to reinstall that installer without a complete reinstallation of windows?
Linney
Found this helpful 0
Linney replied on
MVP

Reply

Not many people are able to delete the "trustedinstaller" I wonder if congratulations are in order?  I think you are probably right when you say that it could be a problem.

Did this article restore that gold plated user?

How do I restore security settings to the default settings?
http://support.microsoft.com/kb/313222/#appliesto

Is the Windows Modules Installer Service disabled in Services?

I don't know any way to create that user other from some sort of image backup or a reinstall of Windows.  Perhaps others may know?

What recovery options come with your machine, do you have a retail DVD, or is it the usual OEM stuff?

Remigius_979
Found this helpful 1
Remigius_979 replied on

Reply

Hi all,

the SubInACL was an interesting experience but did not solve the problem in my case. My error 1935 came with a HRESULT 0x8007054F (internal error). The cbs.log contained some transaction related errors, like e.g. the following:

CSI    00000019 Pending transaction content must be resolved, cannot begin another transaction yet
CSI    0000001a (F) E_UNEXPECTED #1393# from Windows::COM::CComponentStore::InternalTransact(...)[gle=0x8000ffff]
SXS    Transact2 sensing pending content failed with 0x8000ffff

etc.

Finally, I found the solution to my flavor of the problem in the following thread:


I post this because it might save other people from spending too much time on this issue or even messing up their system. I have also read in some locations that people resorted to perform an update install of Windows 7.

Cheers, Remigius.
Linney
Found this helpful 0
Linney replied on
MVP

Reply

Thank you for posting that extra information into this posting.

 

 

Here is some further information on the FSUTIL Command

 

Vista's FSUTIL Command
http://itsvista.com/2007/03/fsutil/